Blog

Plumbers in Fort Worth, TX – Water leaks if not attended too immediately when noticed can become a very costly problem over time. Water lines that are running to your home are metered not only for billing purposes but can be used for accountability also. By following the techniques below in this article you can find a small leak much more easily and help save yourself from a shock the next time you receive your water bill. If you suspect that you have a water leak and need professional plumbers in Fort Worth, TX that you can rely on then get in touch with Benjamin Franklin Plumbing now.

1. Hot Water Heater

The first thing you can do to determine if you have a water leak is to check the pressure relief valve on your hot water heater.  Often these valves are connected directly to a drain and may leak without your knowledge. If you are not able to determine if there is leak because you cannot remove the drain pipe to inspect it then listen for a hissing sound to determine if it may be leaking.

2. Toilets

Inspect all the toilets in your home for leaks by removing the top of the tanks.  You can determine if you have a leak by looking into the tank and if you see ripples in the water from water being continually fed into the tank or if you hear hissing then you may have a leak.  If you are not able to hear anything or you do not notice any ripples you can also add a few drops of food coloring into the tank and then wait it out for a few minutes to see if any of the colored water makes its way into the bowl.  If you need help from plumbers in Fort Worth, TX then give Ben Franklin Plumbing a call now.

3. Meter Line

To determine if you have a leak within your home or just before the water gets to your home there are two methods for this. First, if you have a shut-off valve on the side of your home that will cut off all water leading into your home, go ahead and turn that off. This way you will be able to determine if there is a leak in the water line leading to your home.

Once you have turned off the water entering your home go to your meter line and inspect the dial to see if it is still moving.  If the meter is still turning then you have confirmed that the leak is somewhere between the meter and the water line running into your home.  In some cases, if you have one of the older bronze gate valves on your water meter it is possible that it is faulty and you will need to contact your local water provider to have them fix this.

Walk between your meter and the shut-off valve by your home and look for signs of soft muddy areas or areas where the grass is greener or unusually taller than the rest of the area of your yard. If you notice any of these signs then you will need to get in touch with plumbers in Fort Worth, TX to come and assess the situation and how to best handle it.

4. Hose Bibs

Another great method at assisting with determining the location of the water leak is through hose-bibs.  If you are unfamiliar with what a hose-bib is then this is where you connect your outdoor hoses too.  Typically these will be located at the front and back of the home, but be sure to check all around your house to ensure there are not more.

Once you have located all of the hose bibs you will then need to use a screwdriver and put the metal tip of it directly on the metal part of the hose-bib.  Once you have done this what you will do next is put the knuckle of your thumb on top of the screwdriver, and then you will lower your ear to your knuckle.   Ideally, the screwdriver will work like a stethoscope and this method will work with most metal valves, but not all.

Listen carefully for any sound that will be emitted from the hose-bib. If you hear anything then move on to the next hose-bib if you have more than one.  At the next hose-bib if the sound emitted seems to be louder than at the last hose-bib then the potential leak is closer to the hose-bib with the loudest sound.  You can also try this method inside your home with faucets. If at any time you need assistance from professional plumbers in Fort Worth, TX then get in touch with Benjamin Franklin Plumbing.

About Benjamin Franklin Plumbing in Arlington, Texas

Benjamin Franklin Plumbing in Arlington, TX has professional plumbers in Fort Worth, TX servicing Fort Worth and surrounding areas. Our experienced, courteous and friendly plumbers provide on time plumbing related services to not only Arlington but surrounding areas also. If you are in need of a professional plumber that you can count on for plumbing repairs, maintenance and / or installation then you can count on us at Benjamin Franklin Plumbing in Arlington, Texas.

Ben Franklin Plumbing is a leader in the field for plumbing related repairs. We are also one of the most trusted plumbing service brands in the industry with high standards of service that you can rely on. When you contact us you can rest assured knowing that you are receiving the best plumbers in Fort Worth, TX.  Our commitment to service and excellence is reflected in our stone solid A+ rating with the Better Business Bureau. If you have a plumbing related problem in your home or business and you need help, do not hesitate to contact us today. Our professional, courteous and friendly plumbers in Fort Worth, TX will be more than happy to assist you and answer any of your questions and schedule an appointment with you to assess the plumbing related problem and resolve it at your earliest convenience. Give Benjamin Franklin Plumbing in Arlington, Texas a call today if you are looking for professional plumbers in Fort Worth, TX. If there’s any delay, it’s you we pay^®