Blog

Photo By Andrey_Popov at Shutterstock

Those who live in the Rhome, TX area know that when the going gets tough with their plumbing, a good plumber can come in handy. Whether it’s something as simple as a garbage disposal, or a complex item like a clogged drain or downed water heater, the time to call a plumber is at hand. The professionals at Benjamin Franklin Plumbing can and will provide good, quality plumbing service to those who need it.

A good garbage disposal that lasts should begin with proper installation, and that can only be done by a professional plumber. A unit that is poorly installed is prone to breakage, which means that whole chunks of food can travel down your pipes and can therefore align themselves within the walls. This then results in the hassle of a clogged drainage system, and further issues could crop up down the road.

A clogged drain system can wreak a lot of havoc on your Rhome, TX home, and that is all the more reason for you to call on your plumber for a free assessment and quote.

It’s important for Rhome, TX residents to know the critical signs of clogged drains and be aware of when action needs to be taken by a professional plumber. One is when the toilet starts gurgling. This means that your toilet may have become clogged with too much toilet paper, “flushable wipes,” or solid waste. At times, your child may accidentally flush a small toy down the commode, and this is another item that can result in an immediate drain clog on the toilet.

But you don’t have to use the toilet in order for it to indicate signs of drain trouble. It can gurgle or percolate anytime after you’ve used another appliance or fixture that runs on water, such as your shower or dishwasher, for example. Stinky odors that emit from your drains have much to tell you about when you need to call for service, and typically, the time to call is right away.

If your Rhome, TX home is older, then chances are you could face a major problem in your main sewer drain. This is the first area of your plumbing where water goes in and out of your house on a daily basis. Elements of the natural environment such as rocks or tree roots can crush the pipes with the full impact of their weight and cause great damage that can only be fixed by a plumber.

Older homes could have the added disadvantage of older plumbing fixtures, such as pipes that hold rust or haven’t been cleaned since the previous owners moved out. Even newer pipes aren’t exactly off the hook, as grease, soap, hair, food, and oils can get trapped within the walls of your pipes, thus necessitating the need for quality drain cleaning service from a professional.

Mechanical drain snaking is one method that can be used to pull out tangible objects such as hair, toys, or necklaces that get caught down in the pipes and remain stuck. Because it comes with significant risks, it’s best to call a professional plumber to get the job done. They can solve your problem with this method in a way that doesn’t scratch, tear, or puncture your pipes, which can reduce the likelihood of further plumbing issues for your home.

Mechanical snaking is one method that can solve your drain woes, but it’s not the only one. There is another procedure that is designed for the toughest of drain clogging issues, such as grease, fats, oils, or hardened soap. This is known as the hydro-jetting method, which applies several pounds of pure water to blast away the hardened debris that lines the walls of your pipes over time.

For those who may not know, hydro-jetting applies anywhere from 1,500 to 5,000 psi of pure, clean water from an electric device that’s designed for the toughest plumbing jobs. In fact, it’s one of the safest methods out there, especially when performed by a skilled plumber.

Hydro-jetting beats the odds against older methods where toxic chemicals were used in an effort to clear away the debris inside your drains. These old chemicals had a nasty way of sneaking into your water supply and making its household use a serious health hazard.

Drain cleaning is one of many services offered by the professionals at Benjamin Franklin Plumbing that can be done in a timely manner. In fact, calling a plumber can be done for any other service as it relates to the use of good, clean running water in your home. Sometimes, when the temperature gets cold, it may be a sign that your hot water heater is on the brink and in need of attention, and what better time to call the plumber than then.

Water heater failure comes in many forms, and there are more complex issues that show you when you may need to get your unit fixed or possibly replaced. Low, rumbling noises, persistent cold water, and water that remains lukewarm but never gets hot are signs that you need to call your plumber as quickly as possible to check out your unit.

The average water heater is capable of storing anywhere from 20 to 50 gallons of water, which depends on the size of your household and the amount of water being used on a daily basis. During the heating process, your water gets warmer, but then begins to separate as the remaining batch settles inside the tank. As a result, sediment gets down into the bottom of the tank and can impair the ability of your unit to do its job effectively. Consequently, your water heater can age much more rapidly than its predicted lifespan of 12 years. A new unit may be in order if timely maintenance doesn’t get done as it should.

Water heaters that are on the verge of a meltdown can produce water that is either cloudy, rusty-colored, or has a metallic odor or taste to it. This is due to the problem of sediment collection, which often has traces of elements or alloys within and can cause these sensations to gain immediate notice.

The taste of metal in your water supply can also be traced to ancient, rusty pipes in need of being replaced. But keep in mind that the tank of your water heater is also made of metal, usually iron, and can also be subjected to element exposure over time.

Bearing in mind that your tank can store up to 50 gallons at a time, this is not too surprising. However, it is not something that can be easily ignored, which is the reason to call the plumber to check out the unit. Having the tank replaced by a professional plumber is the best solution to enjoying cleaner drinking water once again.

But it’s not just the water supply that’s affected by the corrosion within your tank. Rust can eat away at anything, and that means that your tank can start to show signs of leakage on or around the base. Cracks and holes that result from rust destruction will cause you to lose hot water, which is something that no homeowner wants to face.

Water that leaks from your heater’s tank can bring a whole batch of problems, from a flooded basement to mold and mildew collection. The latter gets into your drywall and can result in breathing difficulties for those who suffer from mold allergies. Plus, it can draw in wild rodents, especially rats, which would call for the separate services of an exterminator.

A plumber from Benjamin Franklin Plumbing can come out and inspect your water heater to see what needs to be done. Before they begin repairs, it may be necessary for them to shut off the supply valve. This can prevent the loss of any more water and may save on your monthly bill. Any type of excessive pressure can lead to a malfunction in the TPR valve, which may be the only thing that needs to be replaced. But a rusty and worn out tank may need replacement if it turns out to be the source of your woes.

There comes many times when you may need to seek water heater repair service from a professional. It’s something that can happen to any homeowner in spite of the age of your water heater. This is especially true if you decide to call for routine maintenance, and a good flush can cleanse the sediment build up which lurks at the bottom of the tank.

But there comes a point when the cost of repairs exceeds the value of your water heater, which is typical of the unit’s age. Older water heaters that suffer from years of wear and tear will eventually reach their limit, and that’s when it’s time to look into buying a brand new one.

Keeping a written record of all repairs that have been done within the last year of your water heater can give you an honest glimpse into whether or not it should be replaced. Parts such as valves that have failed over time can only be replaced so much before the entire system fails completely. Speaking to your plumber can give you a good idea as to what you may need in a newer, more efficient model, and from there you should be able to move forward.

Hot water heaters aren’t the only system prone to aging and in need of replacement. Many times, your pipes can wear down, especially in older homes where they have been used for decades without so much as a basic repair. Rusty, galvanized pipes or pipes that are made of polybutylene can be the primary culprits in why your pipes may burst at any moment.

What makes this plumbing problem so unique is that any older pipe can burst at any time and often without any warning. Any time your pipes get corroded, your drinking water suffers. This is due to rust build up making its way into your water supply.

Even the chlorine that’s meant to ensure clean drinking water can eventually lead to corrosion through build up, and that’s when it’s wise to call your plumber. Pipe breaks are unique in that they can be much harder to detect, which leads to massive damage and much expense in repairs.

When winter approaches, your pipes can burst due to freezing temperatures that fall below zero. Sudden and unexplained changes in water pressure are one reason to look into having your pipes fixed or replaced. Good water pressure is needed to push water in and out of your home, and when it appears to be lacking, having a plumber over to inspect your pipes for possible damage is highly suggested.

Water marks or wet imprints that adorn your walls are sure signs of pipe leakage due to bursting. Since a majority of the pipe work within your home happens to lie within the walls, this should come as no surprise. Wherever the water spot is located, there your problem lies. The pipe within that particular location is your most likely culprit, and once detected, can save you money on expensive drywall replacement and repair.

Replacing the pipes inside your walls may require the plumber to remove a section of drywall, which is normal under the circumstances. But once the leak is fixed, then you should have no worries.

Keeping note of how much water you use every month may help you in determining any further issues with your pipes. In fact, one of the key ingredients in having sudden pipe problems is if you look at your monthly water bill and happen to notice a surge in your monthly charges. Water that is lost during leaks or burst pipes are an excellent culprit, which means that you should hire a plumber to inspect the pipe work for any holes, puncture, or other damage.

Wherever your problem lies, Benjamin Franklin Plumbing can help. To get a free quote, all you need to do is call or visit their website today. From there, a professional can answer all of your questions.