Leaks are a plumbing emergency and need to be avoided at all costs. Because if you’re not careful, you can end up paying a fortune to a plumber in Fort Worth, TX. Read this article for common questions about leaks in your plumbing. Feel free to get in touch with us if you have further questions.

Frequently Asked Questions About Leaks in Your Plumbing

Below are some of the most common questions homeowners have about their plumbing. Each of these questions has been answered by a licensed professional in your area. For clarifications, please don’t hesitate to get in touch. We’re always happy to help. Or if you need professional plumbing service for your home or business, contact Benjamin Franklin Plumbing of Fort Worth today. We are a full-service plumbing company that offers residential and commercial plumbing services.

  1. Why is my water bill super high?

If your water bill has suddenly skyrocketed, this can indicate leaks in your plumbing especially when you also have low water pressure. Try to do a water meter test first to check for leaks in your plumbing. Just do two separate readings and compare the results. They should be the same; otherwise, there’s a leak somewhere in your plumbing. We suggest calling a plumber in Fort Worth, TX, for leak detection. Our plumbing experts will locate the leak and fix it for you.

You might want to also check for toilet leaks as this can also waste hundreds of gallons of water when undetected. To test for leaks, just pour a few drops of food coloring into the toilet tank and wait for about 15 minutes. Check the toilet bowl after and make sure the water’s color doesn’t change. If it does change, that usually indicates a toilet leak. Call a plumber immediately so they can inspect the toilet and fix the leak. A toilet leak might seem harmless but this can waste several gallons of water, so please make sure you fix this as soon as possible.

For homeowners that want to conserve water and save money, we recommend switching to low-flow or dual-flush toilets. For installation, make sure to only hire a licensed plumber.

  1. Why do pipes leak?

There are so many reasons why pipes can leak. Check the reasons below and make sure you don’t commit the same mistake.

Incorrect installation – If you’re planning to replace or repair a pipe, make sure to only hire a licensed plumber in your area, to ensure correct installation. Never install it on your own because if you make a mistake, you will be coming home to a flooded basement.

Tree roots – Do you see trees near your plumbing? We suggest calling professionals so they can inspect the area. You need to be extra careful with them because the roots can easily penetrate the pipes. A small leak is enough to cause catastrophic damage that can cost you an arm and a leg. Don’t worry, there are professionals who can advise you on what to do with the trees.

High water pressure – The water pressure level in your home should be between 40 and 60 PSI. High water pressure can severely strain the pipes, causing them to break. Call a plumber if your water pressure is high so he can help you fix the problem.

Low water pressure will not lead to a leak in your plumbing but it may indicate a leak. If you have a standard water heater, sediment can also build up faster when there’s low water pressure. Call a professional if you suspect a leak in your plumbing so he can detect leaks.

  1. Do we really need to insulate exposed pipes?

Yes, it’s a must to protect them especially when the temperature starts dropping. If you have exposed pipes inside and outside of your home, get an insulating blanket to protect exposed pipes. If you don’t cover them, the water inside the pipes can freeze. When this happens, you won’t have water at home and this can be really inconvenient. If you suddenly run out of water during winter, this usually means the water inside the pipes is frozen. Call a plumber in Fort Worth, TX, immediately to help you thaw the frozen pipes.

Please don’t wait for the pipes to expand and burst or it will even cost you more money. You may even have to contact restoration companies to prevent mold growth.

In addition to insulating the pipes, you can also slightly open the faucet so that hot water can flow through the pipes. Try to also open the cabinet doors inside the sink so that warm air will circulate in that area.

  1. So what are the signs of leaks in our plumbing systems?

The obvious sign there’s a leak in your plumbing is when you see pooling water near the plumbing pipes. Other signs include seeing water spots in the walls or ceilings, low water pressure and high water bills. If you suspect a leak in your plumbing, we suggest you contact a plumber in your area, for professional leak detection. Our plumbing experts are equipped with the right tools to help us locate the leak. We can also help you