Photo By skimin0k at Shutterstock

Buying a tankless water heater in Saginaw, TX is indeed a major investment. These water heaters are quite expensive compared to their traditional counterparts. However, they offer numerous benefits and you can make it a worthy investment by prolonging its life. The life of the tankless water heater in Saginaw, TX can be prolonged with proper maintenance.

Just as the steel/iron sheet of the traditional water heater can become rusted, a tankless water heater’s heating chamber walls can become eroded with the excessive build-up of minerals.

Different companies are offering different models and features of a tankless water heater in Saginaw, TX. It is recommended to read the instruction manual thoroughly. It will help you know where the filters and other important parts of a heater are located. Other than this, it is also advisable to get the tankless water heater in Saginaw, TX installed by professional plumbers.

Top 5 Ways to Maintain a Tankless Water Heater in Saginaw, TX

You can keep your tankless water heater in Saginaw, TX long-lasting and durable. It can remain functional up to 20 years with proper maintenance. Here’s a guide on how to maintain it.

1.     Clean the Air Intake Filters

To prevent debris from accumulating in your tankless water heater, air intake filters are necessary. Air can only flow smoothly into a heater if its air filters are cleaned.

Check the user manual for specific instructions pertaining to your tankless water heater’s model. Remove the air filters, and rinse it with clean water. Make sure to dry it before reinstalling. You may keep it to get air-dyed or use paper towels for this purpose. After reinstalling, screw-on all service caps tightly. Open both valves and restore power. Check it and make sure there aren’t any leaks.

Other than this, you can also use vinegar solution during flushing to clean your air filters.

2.     Flush Out

On average, you should flush out your tankless water heater in Saginaw, TX once in a year or as instructed in the manual. It also depends on the type of water.

Flushing can take up to an hour. Here’s a step-by-step guide on how to flush out your tankless water heater.

  1. To flush a tankless water heater, turn off its power and the water valves, hot and cold, both.
  2. Slowly take off the purge caps.
  3. You would have got a housing line at the time of purchasing the tankless water heater or you can purchase it from any plumbing shop. Fix the housing line to the three valves.
  4. Bring a bucket filled with 5 gallons of food-grade white vinegar.
  5. Turn on the pump after opening the hot and cold water valves.
  6. The vinegar will start circulating throughout the unit. Let it circulate for about 45 minutes.
  7. Then fill the bucket with plain water and allow it to circulate in the unit for at least 5 minutes. This process will remove the lime-scale and mineral buildup from your tankless water heater.

3.     Add Water Softener

Depending on the area you live in, the hardness of water varies. The supply of water that you get at your home would determine the hardness of the water. Based on this, you may require adding a water softener system installed. Hard water damages the unit. There are also some chemicals available as a water softener in the market which you can add in your water. A water softener will avoid magnesium and calcium deposits in the tankless water heater in Saginaw, TX.

4.     Check the Pressure Relief Valve

You can see a switch on the side of your water heater with a pipe. The pipe is made up of copper