6 Common Problems That A Plumber Experiences And How To Fix Them | Mansfield, TX
Photo By Pineapple Studio at istock
There are many components within a plumbing system and like all things in life, they will become weak with age. They are also not immune to wear and tear from frequent use. Plumbers deal with many complex problems from installing new components like water heaters to unclogging stubborn drains. Benjamin Franklin Plumbing of Fort Worth in Mansfield, TX, has experienced plumbers that are qualified to deal with simple problems to larger problems that would require some more hands. Here are some of the most common problems faced in their day to day life as well as how they would resolve these problems.
1. Clogged drains or pipes
This is one of the most common problems plumbers in Mansfield, TX face. There are so many things that can clog a drain or a pipe and some of these things require special tools to dislodge the blockage and stop it from recurring frequently. A foreign object can make its way into your drainage pipes and no amount of drain cleaning chemicals will dissolve the object or dislodge it. It can also be very difficult to determine where exactly the blockage is. The block can also be caused by a build-up of materials like grime, hair, soap, plant roots, and mineral build-up. There are various methods a plumber can use to remove the clog. The plumber will first insert a camera into the drain that is not draining the water as efficiently as it should. He will be able to see where the blockage is and what caused it. It is also important to inspect the conditions of the pipes to make sure that the blockage is not caused by the pipe wall that has collapsed. It will also prevent the service provider from using the incorrect method that could damage your pipes. If you have an isolated blockage then simple drain cleaning services are required but if all the drains in your home don’t function optimally then you have a bigger problem on your hands.
There are a few different ways a plumber can remove a blockage. The first and most common one is a drain snake. This consists of a long flexible wire that has a corkscrew attachment on one end and a crank mechanism on the other end. The drain snake is pushed into the pipe as far as it will go until it meets resistance. The plumber will turn the crank until it has broken through the clog. The service provider will then pull out the drain snake and the clog might come out as well otherwise it will be flushed down the drain with water. Another method that plumbers use in pressurized water. This method is extremely effective against mineral build-up and tree roots. A stream of high pressure strayed throughout the pipe making sure to remove all forms of debris. This a highly effective method and it will decrease the number of times you have a blocked drain because your pipes will be cleaner for longer.
2. Running toilet or clogged toilet
Each home has at least one toilet and we use our toilets every day and multiple times a day. Some toilet problems can be left until the next business day but other times you need emergency repairs especially if your only toilet is not working. A clogged toilet can turn into a messy situation which can be costly because you need to hire a professional cleaning company to remove any waste that has been pushed out of the toilet because the water was unable to drain properly. It is best to hire a professional to attend to your clogged toilet so you don’t have to spend hours thrusting a plunger into your toilet and it might not resolve the problem. Plumbers tend to use the same methods for unblocking a toilet as they would to unblock a clogged pipe.
A toilet becomes a running toilet when the tank does not stop filling up and doesn’t prevent the water from flowing down into the drainage pipe. The water is wasted and this can lead to high water bills and a running toilet also makes an annoying sound. There are a few things that can cause a running toilet. The washer might be old and it needs to be replaced or the components have rusted and need to be repaired. A plumber can also install a water-efficient toilet that will help save you some money by decreasing your water bill. This will also help the environment because toilets use a lot of water per flush.
3. Dripping faucets
No matter how tight you close the faucet, it still manages to drip. The sound can be very annoying especially if you just want a moment of silence after work. Just like a running toilet, a dripping faucet will increase your water bill and you will waste a precious resource. There are three main things that can cause a faucet to start dripping like mineral build up on the inner parts of the faucet and these affect the faucet’s ability to seal off the water inlets. Depending on what caused the mineral build-up, certain chemicals are required to remove the build-up. A fact comes into contact with a lot of water and corrosion is a reality. The parts within the faucet can be corroded away which caused the washers and seals to become useless. if the parts have corroded away then it is better to replace the faucet. Another common problem that causes faucets to drip is a worn O ring. This usually causes the faucet to leak around the base of the spout. The average homeowner can replace a faucet by themselves but sometimes it requires an experienced hand to make sure that the problem is resolved properly. A plumber can replace the old washer that is causing the faucet to trip or they might install a new faucet because it is better to replace the old one rather than trying to repair it. The service provider will turn off the water main so the water doesn’t spray every and cause damages. After that, he will remove the decorative fittings with his tools. The plumber will inspect all the parts to see what is causing the faucet to drip. The plumber will provide you with a wide selection of faucets to choose from that will suit your homes aesthetic.
4. Water heater
In today’s modern society we have become so used to having access to warm water without having to manually heat up the water. Plumbers are often called out to inspect a faulty or nonfunctional water heater. It can be difficult to spot the problem without having the shower suddenly turn icy. There are a few things that can go wrong in your water heater. The pilot light might have gone out and you just need to relight it and the water heater will function as usual. Sometimes the thermostat is broken and it is not sending the correct signals to the water heater and it doesn’t heat the water to the correct temperature. The water heater can also have leaks which means you are spending money on hot water that you can’t use because it is escaping from the pipes. The water heater might be producing water at the correct temperature and quantity but sometimes the water smells like rust. This is likely caused by pipes that have been corroded away. The plumbers at Benjamin Franklin Plumbing of Fort Worth in Mansfield, TX specialize in water heater repairs. They have a wide range of products to choose from if your water heater can’t be repaired and it needs to be replaced. They will assist you with the installation and won’t leave your side until your water heater is in perfect working condition. If the water heater is not working due to an electrical problem then they recommend an electrician that can help you resolve this problem. the professionals will know what process to follow so that your home doesn’t become more damaged by poor workmanship.
5. Leaky pipes
Where there are pipes, there are leaks. It is uncommon for a home to never experience a leaking pipe. They are more frequent in old homes or homes that have not had a plumbing inspection or upgrade in a few years. There are a few things that cause pipes to leak for example generally wear and tear, plant root, incorrect installations, and incorrect components. It is advised to hire a professional if you suspect that your pipes are leaking. First, they will do a leak detection to see where the leak is coming from and what the cause is. After assessing the leak they will suggest the best method of repairs. The pipes might have to be replaced completely and excavation is necessary. Other times a sealant can be applied to the inside of the pipes to stop them from leaking. A plumbing service provider might advise the homeowner that the large trees on the property will continuously cause leaks and blockages if it is not repaired correctly. Leaky pipes can affect various aspects of your home. if you have a leaky pipe in your ceiling or walls then your home will become water damaged. If it is left for too long then mold will grow and leave your home smelly and a health hazard.
6. Low water pressure
Low water pressure is often not the problem but rather a symptom of the problem. There are a few things that can cause the water pressure in your home to decrease. Leaky pipes can cause low water pressure because the water is escaping from pipes and leaking into the walls or foundation. There can be one large leak or multiple small leaks in your home’s plumbing system that can cause the water pressure to decrease. A mineral build-up, especially in the pipes that supply water to your bathroom and kitchen, can also cause the water pressure to weaken. The pressure regulator can also be faulty because of age or wear and tear. If the low water pressure is caused by a broken pressure regulator then you notice a sudden decrease in pressure or an extreme increase. It is advised to contact a plumbing service provider to replace the pressure regulator because they have access to a variety of brands and models that will fit into your plumbing system. Low water pressure can also be caused by values that are not opened properly within your home like the man shut off valve or the water meter valve. In some rare cases, your plumbing system might not be installed correctly and your neighbor could be using your water which would cause the water pressure to decrease. The plumber will also inspect the pipes and fittings to see if the abnormal water pressure has caused any other problems.
It is apparent that some of the common problems have quick and easy fixes that will require very little effort. Other problems might be caused by more serious issues. It is important to hire a professional plumber to have a look at your plumbing system so that they can determine what is causing the problem and where it is. If you attempt to conduct these repairs yourself then you might be doing more harm than good. Benjamin Franklin Plumbing of Fort Worth in Mansfield, TX will provide you with the best possible advice and will conduct the repairs that are necessary to restore your plumbing system to full functionality. The plumbers provide a wide range of services that deal with drain cleaning, leak detection, water heaters, water filters, and general plumbing services.
Contact Benjamin Franklin today and schedule your appointment for convenient and reliable plumbing repairs.