Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber

Blog

Common Ways to Unclog Drains Easily | Plumber in Arlington, TX

Common Ways to Unclog Drains Easily | Plumber in Arlington, TX

A clogged drain is a nightmare for anyone who has a party going on at their place or relatives come around for a family feast. You might have been taking care of the drains and the pipes on a regular basis but there is a chance that you overlooked the warning signs that your drain started to give you a few days back. Some of the warning indicators include the water taking longer to drain in the sinks, water coming around your feet in the shower, and unpleasant smells coming out of the sink trap or drains.

Plumber in Arlington, TX takes these indicators as signs of an unclogged drain coming your way. This issue needs to be resolved on an urgent basis or a more serious problem like the bursting of a pipe or blockage of the whole plumbing network of the house would take place.

To solve this issue in an effective and efficient manner people try all sorts of liquids and other stuff to get rid of all the gunk and grime that has built up at the surface or the interior of the drain. Expert plumber in Arlington, TX suggests you use these easy methods mentioned in this article that are a useful way to unclog the toughest of drains.

Bent Wire Hanger

One of the easiest ways to clear clogged drain is to use a wire hanger. For this, you need to take a regular wire coat hanger. Straighten it out and bend one of its ends to make something similar to a small fishing hook. Now remove the drain cover and push it through the drain pipes. Start fishing for all sorts of nasty stuff and hair that are stuck on the inside of the pipes.

Once you feel there is enough that you’ve caught on the hook pull it out and throw away all the dirt you’ve gathered. If needed again push the wire hanger inside the drain to fish for more stuff that has piled up inside.

According to the plumber in Arlington, TX you need to remember that this technique is used to pull the gunk out and not push it inside further. Once the dirt is out, run the hot water through the pipeline to clean things up.

Baking Soda and Vinegar

Take a measuring cup and mix one-third cup of both, baking soda and vinegar together until they are blended together. This mixture will fizz immediately and bubbles will form at its surface. Waste no time and pour it down slowly through the drain that is clogged.

This chemical reaction between the two substances will help remove the dirt that has built inside the pipes of the drain. Let the action take place for an hour or even more depending on the clogged situation and let the mixture stay there for overnight. Run hot water through the drain the next day to clear the residue of the foamy mixture.

Wet and Dry Vacuum

An excellent tool to unclog drains is a wet and dry vacuum as per plumber in Arlington, TX. First, you need to cover up that drain properly that needs to be cleaned to avoid any kind of mess around it. Then you should set the vacuum to suck the liquid out. Now you need to tighten the seal around the drain for which you can use an old plunger head that serves to be pretty creative for this purpose.

Finally, turn the highest setting on the vacuum so that it pulls out every clogged item out of the drain with pressure and almost in no time. Dispose of the vacuum bag once you feel everything is out.

Caustic Soda

Also known as Sodium Hydroxide, caustic soda is a chemical that if not used with right safety and protective tools and equipment can leave nasty and painful chemical burns. Therefore plumber in Arlington, TX always advice you use them with extreme caution and with eye protecting goggles and rubber gloves on.

The right method to use this is to take a bucket and fill it with ¾ gallon of cold or room temperature water. Add three cups of caustic soda into it and stir it with the help of a wooden spoon. Bubbles would start to form on the surface of this mixture as it heats up.

As the chemical reaction is under process pour the blend through the clogged drain carefully and let it sit there for approximately 20 or 30 minutes. Take a kettle and boil up as much water that is needed and then pour this boiling hot water down the drain to flush the residue.

 Dish Detergent

One of the effective ways to clear a clogged toilet as per plumber in Arlington, TX is to use a dish detergent. Every household has this available and can be used once a month to prevent any sort of major clogging in the future.

Take ¼ cup of dish detergent and pour it into the toilet bowl. The properties of the detergent allow it to act as a lubricant which will break any kind of residue that is greasy. Let the detergent sit for 30 minutes or so in the bowl and then pour some boiling hot water down to wash away the leftovers of the lubricant and the dirt.

To have a long-lasting effect of this method plumber in Arlington, TX suggests using a plunger once everything has been flushed away by hot water.

Final Word

It is important for you to maintain your plumbing system on a regular basis, seek advice from experts and help from professionals. This is necessary for the maintenance of the plumbing network that is set beneath and installed in your house.

And also every issue needs a special service of its own, if things go out of hand, for which specialized plumbers in Arlington, TX are available who use the latest most efficient tools and techniques to solve the issue.

If it is time for you to get a few pipes and drains cleared then contact Benjamin Franklin right away. Their plumber in Arlington, TX are highly qualified in dealing with complex plumbing issues and professionally trained to answer all your questions and clarify all the myths related to it. For any further assistance call their emergency number which is available 24/7.