Essential Tools Every Plumbing Toolbox Must Have | Plumber in Fort Worth, TX

If you have been living in your house long enough then you are sure to face some issues with regards to its electrical or plumbing networks. Just like for every small electrical problem that you face you have a small toolbox dedicated for the tools required to deal with these issues, in the same way, you need to have a toolkit which contains the essential tools required to fix plumbing issues.

For every simple gas line repair or water line repair in Fort Worth, TX or any place else rather than calling a professional plumber, which is time-consuming and impractical, it is better you have some right tools in your hands to fix the problem yourself.

Most of the tools required for the maintenance of plumbing at home are easily available. Therefore, the plumber in Fort Worth, TX suggests you start with collecting the basic tools first and then keep on adding others with time as you need them. Some of the standard tools that you might already have, that is also supposed to be a part of your toolkit apart from a toolbox itself includes; a hammer, screwdrivers, work gloves, safety goggles, tape measure, utility knife, and a drill driver.

Other essential tools dedicated for plumbing purposes are mentioned below in this article.

Basin wrench

Plumber in Fort Worth, TX says that every plumber’s toolbox’s basic and most necessary staple is a basin wrench. This tool has a long shaft and a swivel which makes it look like a clamp-like apparatus from the end. Because of this design, it can easily reach deep, narrow spaces behind the sinks and is commonly used to loosen and tighten nuts and bolts on sink faucets.

Adjustable wrench

This tool is perfectly designed with such quality that its firm jaw setting doesn’t slip while you are at work. It is an ideal match for plumbing parts that are hexagonal and have similarly shaped nuts. It is also great to use on compression fittings and supply lines. According to the plumber in Fort Worth, TX to deal with all kinds of repairs you should have both six-inch and 10-inch adjustable wrenches available in your toolbox.

Pipe wrench

A pipe wrench is a heavier tool as compared to an adjustable wrench. It is also used to tighten and loosen nuts and fittings. For a project usually, two pipe wrenches are required; one is used to hold and grip and the other to turn. One recommendation made by the plumber in Fort Worth, TX to everyone to avoid any sort of damage to the finishing of your fixture is to make sure that you wrap the wrench’s jaw in cloth.

Tongue-and-groove pliers

Commonly known as the most versatile tool among the plumber in Fort Worth, TX, a tongue-and-groove plier is a slip-joint plier that can be used for almost anything. Its serrated jaws that are designed to be 45 to 60 degrees from the handles give the tool a curved appearance and allow it to grab, twist, tighten, loosen, pull, or hold anything.

Hacksaw

To be able to cut through metal and plastic pipes easily and conveniently, a hacksaw is one of the most essential items your toolbox must have. It also allows you to cut through nuts and bolts, screws, and other hardware. But as per plumber in Fort Worth, TX make sure to keep an extra pair of blades for the hacksaw available in your toolbox at all times as its blade gets dull and even breaks.

Metal file

After you cut something that area is bound to become rough and might even injure you. To smooth the edges of the cut on the metal pipes a metal file is necessary. Although there are different sizes available at retail stores and shops, the plumber in Fort Worth, TX suggests you have these two always in your plumbing box; a rat-tail file which is round and tapered, and a half-round file which has rounded and flat surfaces.

Thread seal tape

To help prevent leaks at joint connections that are threaded a thread seal tape also referred to as the plumber’s tape or PTFE tape, is the right thing to use. It can be used on a variety of plumbing projects like on the water line connections or the shower heads.

Head auger

A head auger is a substitute for a plunger that is not able to unclog a drain. A hand auger is simply a metal wire that has a hand crank attached to it that allows the wire to be pushed in the drain of showers, tubs, sinks, or any other places to get hold of the clog. Plumber in Fort Worth, TX warns you to not use a hand auger in toilets rather use a closet or toilet auger that is available for this job.

Tubing cutter

As the name suggests, it is a cutter that is used to cut copper pipes. It is a necessary plumbing tool to have in your toolbox according to the plumber in Fort Worth, TX as it ensures even and smooth cuts every time. Both, a mini-cutter and a standard tubing cutter should be in your box as a mini-cutter is vital to reach tight, small places.

Toilet plungers

Plungers are what almost all households usually have. You should also have two of these plungers that are a necessity as stated by the plumber in Fort Worth, TX. One is the flange plunger that used to clear toilet clogs, whereas the other one, which is the cup plunger is shaped to clear clogs in sinks and showers.

Final Word

Small plumbing issues happen on a frequent basis in homes that have been under use for a long time. With these essential tools, you would be able to fix these problems on your own in no time.

In case you need any sort of professional help when matters go out of your hand then contact Benjamin Franklin right away. Their team of professionals is well-versed in dealing with all kinds of plumbing issues. For further information and guidance, contact them on their 24/7 emergency number.