Tankless Water Heater | Tankless Water Heaters Fort Worth

Tankless Water Heater Defined

A tankless water heater, also called Instantaneous or “on demand water heaters”, provides hot water as it is needed when a tap is opened. Traditional storage water heaters produce standby energy losses that cost you money. Standby energy loss is the process of reheating the water in a tank style water heater until it is used. When you’re considering the installation of tankless water heaters in Fort Worth, a Benjamin Franklin plumber in Fort Worth will be glad to assist you.

How it Works

Tankless water heaters don’t use a storage tank, avoiding the standby heat losses associated with tank styled water heaters. They heat water directly as cold water enters the appliance. The tankless water heater eliminates the wait of a storage water heater to fill and heat water. Typically, tankless water heaters provide hot water at a rate of 2 – 5 gallons per minute, with gas-fired tankless water heaters producing higher flow rates than electric tankless water heaters.

Tankless water heaters are available in different sizes and smaller models won’t supply enough hot water for simultaneous, multiple uses in large households. For example, two persons showering at the same time can leave both bathers receiving cold water. To prevent this problem, install a “whole house” type tankless water heater or install two or more of the appliances connected for simultaneous demands of hot water. Ensure the appliance is appropriately sized for your household’s requirements, Additional applications for tankless water heaters in Fort Worth include the following:

• Outdoor kitchens
• Pool house or pool shower
• Remote bathrooms or hot tubs
• Shops and garages
• Livestock barns
• To serve as a booster, such as with a solar hot water heater
• For long pipe runs eliminating wasted water remaining in pipes
• Public or employee restrooms, and employee kitchens

In homes that use 41 gallons or less of hot water daily, tankless water heaters in Fort Worth can be 22% – 34% more energy efficient than conventional storage tank water heaters. Independent testing has indicated an energy efficiency of up to 22% for large use homes using up to 76 gallons of hot water a day with an appropriately sized appliance. Homes that use greater amounts, up to 86 gallons per day can be 8% – 14% more energy efficient. Greater energy savings of 27% – 50% are possible if you install a tankless water heater at each hot water outlet.

Selecting Fuel

You will first need to select between an electric or gas tankless water heater. Next, identify whether the available gas type is natural gas or propane. Whether electric or gas, the energy supply will need to be sufficient for the appliance. This means an adequate gas supply line and gas pressure for a gas model, for example. A gas model may also require minimal electricity to power its controls, and the appropriate flue for exhaust of gas by products will be required.

If you select an electric model, an adequate electrical supply will be required. If the appropriate supply is not available it will require the installation of the appropriate wire and circuit breaker as required and to building code. These considerations are best assessed, and provided by a Benjamin Franklin plumber in Fort Worth to ensure the tankless water heater requirements are properly met.

Selecting Location, Size, and Demand

Additional factors to consider for tankless water heaters in Fort Worth installation is the where it will be located. This will depend upon an appliance that will heat the water at a single location, such as a sink, an entire room such as a bathroom or kitchen, or the entire home. The number of fixtures the appliance will serve is an important consideration in the required size of the unit.

Temperature Rise

Temperature rise is an important factor to ensure adequate hot water. Ambient incoming water temperature will play a role in the required rise required. The simultaneous use of multiple taps will increase the required demand. This is another factor best assessed by a qualified and experienced plumber in Fort Worth to ensure an adequate supply of hot water.

Outlasts Conventional Water Heaters

Tankless water heaters in Fort Worth last an average of 20 years. With the availability of parts this may be extended even further depending upon the model. While the tankless will cost more initially than a standard conventional water heater, it lasts on average twice as long under normal circumstances and with routine maintenance. However, the energy efficiency of tankless water heaters in Fort Worth will exceed any current conventional style water heater when properly sized for your household and professionally installed.

Professionally Installed

Ensuring that you hire a qualified plumber in Fort Worth will make the difference between receiving intermittent cold water during a shower, and luxuriating in piping hot water.

While cutting energy costs is on almost everyone’s agenda, not every home will be a candidate for a tankless water heater. Your Benjamin Franklin plumber in Fort Worth will assist you in determining if your household may benefit from energy efficient tankless water heaters in Fort Worth. Each household is unique due to a number of factors, and these factors are imperative to consider ensuring your satisfaction. For this reason, ensure you hire a qualified, licensed plumber in Fort Worth when considering installing tankless water heaters in Fort Worth.

Our plumbers serve Arlington, Fort Worth and the surrounding areas, providing professional grade plumbing services, included tankless water heater installation for your household’s hot water needs. Call to schedule a consultation with a Benjamin Franklin plumber in Fort Worth to find out if your home’s hot water requirements can be met with energy efficient tankless water heaters in Fort Worth. We are a member of the BBB with an A+ rating.