A water heater is one of the most overlooked appliances in the house. The importance of the water heater is only realized when the water heater breaks down, stopping the supply of warm shower water. Water heater repair in Fort Worth, TX is important when the water heater breaks down in the peak of the cold icy winters in the Fort Worth area.

The Benefits of Proper Maintenance of Water Heater

You can easily avoid last minute water heater repair in Fort Worth, TX by properly caring for and maintaining your water heater. Furthermore, you should contact a professional plumber in Fort Worth, TX to conduct inspection and maintenance at least once a year.

  • With proper and regular maintenance you ensure your water heater working efficiently for extended period of time. You are able to save money by not needing to purchase a new water heater.
  • Proper maintenance would also help in maintaining the water quality in your house.
  • A well-kept and properly maintained water heater would also reduce the need for frequent water heater repair in Fort Worth, TX.
  • With proper maintenance of your water heater you can also save on your energy bills, as well maintained water heaters run more efficiently.

As you can see, there are countless benefits of regular water heating maintenance. Expert plumbers in Fort Worth, TX will tell you that regular maintenance of your heater is not only beneficial but necessary and surely pays off in the long run.

Top Tips of Water Heater Maintenance

The heating element of a water heater can easily be damaged because of the minerals in the water that deposit on the element. If not maintained the heating element is prone to damage and requires frequent repairs. Furthermore, the water heater repair in Fort Worth, TX may not be your only concern. You may also require to replace the entire tank if you avoid the necessary maintenance.

The Anode Rod

The water heaters are usually equipped with sacrificial anodes that are designed to prevent the water heater tank to rust and get damaged. These anode rods are normally made of aluminum or sometimes made of magnesium. These anode rods need to be frequently changed, otherwise the tank will start to rust. A qualified plumber in Fort Worth, TX will check these rods when visiting for scheduled maintenance. If the water in your area is aggressive the anodes would be required to change more frequently.

 

Flushing Water Tank Is Essential

It is important that the water tank has its water completely flushed and thoroughly cleaned by an expert plumber at least once a year. Flushing the water heater tank ensures that there isn’t any sediment build up. This will help in protecting the water heater and also help in maintaining water quality. Efficiency of the water heater is also improved after flushing.

Checking the Fixtures and Pipes

The qualified plumber in Fort Worth, TX will also check all the fixtures and pipes to make sure there is no leaks or damage. These leaks can be a reason for high water bills and inefficient water heater performance and needto be fixed right away.

Insulating the Water Heater Tank

If the qualified plumber in Fort Worth, TX sees the need, they may recommend insulating the water heater tank to improve efficiency and lower the energy bills.

The Temperature and the Pressure Valves of the Water Heater Must Be Checked

Whenever the qualified plumber in Fort Worth, TX will visit for regular maintenance or water heater repair in Fort Worth, TX the plumber will check if pressure and temperature relief valve is functioning properly.

The valves are designed to protect the water heater from getting damaged or get to dangerously high pressures by releasing some water. The water heater temperature and pressure valve needs to be replaced if it is broken because it is a government requirement that all water heaters that have tank need to have this safety feature.

The valve should also need to be properly setup to avoid very hot water from scalding when the water splatters everywhere.

Make Sure That the Water Heater Is Set on Proper Setting

You should consult the qualified plumber in Fort Worth, TX about the optimum settings for the water heater. These settings will provide you with the greatest comfort and convenience, while at the same time provide you with the lowest possible energy bills.

Properly Drain the Water Heater When Not in Use

Whenever You Plan to stop using the water heater for a long time, you should have the water heater tank properly drained and shut down by the plumber. This will help in avoiding flooding and straining the water heater.

Make Sure the Venting System Is Working Properly

The venting system needs to be working properly for your gas powered water heaters. The venting system should not be obstructed and should have a clear path. Any damage should be promptly repaired by a plumber.

The Need for Quality Water Heater

You need to ensure that you are making a quality purchase when you are buying a water heater, because you do not purchase water heaters every day and will hopefully have this equipment for about 8 to 10 years.

To make your investment worthwhile invest in a quality water heater and proper maintenance. You would be surprised that you are able to save more when you purchase high quality products and take care of maintenance.

The Bottom Line

The professional plumber in Fort Worth, TX will ensure that your water heater is properly insulated, does not have any wiring issues and is thoroughly cleaned. This will help in your water heater running more efficiently and save money on energy bills and repair costs.

The highly qualified and well-equipped staff at Benjamin Franklin Plumbing Fort Worth is an ideal choice for all the plumbing needs for your home.