Water Heater Repairs in Haslet, TX that Can Save You Money, Time and Cold Showers on Chilly Mornings
Photo By RossHelen at Shutterstock
There are a few things that can send chills down your back as fast as turning on the shower to find cold water running down on you! And you start cursing yourself for the pathetic water heater repair in Haslet, TX job you attempted yourself. I should have hired a professional; you tell yourself as you get out of the shower and head to the office with messy hair and frozen toes.
One of the biggest reasons why people have to opt for new water heaters is that they try to attempt water heater repairs in Haslet, TX themselves. If only they’d leave the job to the professionals, they wouldn’t have to worry about cold showers or expensive replacements. So what exactly goes wrong with your water heater anyway? Before we take a look at the possible repairs required, let’s first take a look at some of the symptoms that may indicate that water heater repairs in Haslet, TX are imminent:
The Water Is Discolored and has a Metallic Smell to It
Usually, the funny smell and the discoloration is due to bacteria and scale build-up in the tank of the water heater. A water heater repair in Haslet, TX professional can quickly fix this problem by flushing the water tank. He may also take a look at the anode rods if the water is rusty. The anode rods keep the tank from rusting, but, they dissolve with time and need to be replaced.
The Water Takes too Long to Reheat
This could be due to sediment build-up at the bottom of the tank or because of problems with the lower element. There can also be an issue with the thermostat. These problems can easily be resolved with good flushing; but if the water heater has not been flushed in a long time or is too old, then it could lead to more severe problems.
There is No Hot Water
Many times this issue is resolved by resetting the circuit breaker and does not cost a dime to fix. But other problems like issues with the limit switch, loose wire, thermostat, and heating element could mean a more serious water heater repair in Haslet, TX. As long as the problem is not with the heating element, which could be quite expensive, all the other issues can easily be resolved in an economic price.
Insufficient Hot Water
In many cases, the causes of this are the ones that lead to no hot water; inadequate hot water is often the unnoticed or ignored symptom which eventually leads to a more serious problem that could cause expensive water heater repairs in Haslet, TX or even a replacement if you don’t get professional help in time.
Leakage in the Water Heater
Leakage usually indicates that your water heater has hit expiration. Leakages occur due to the wear and tear of a water heater. Most water heaters come with a life of about 13 years. Over the years, sediment builds up in the bottom of the water tank, due to which, the water tank will eventually rust through and begin to leak. This means you need to replace your water heater.
However, there are a few other causes of leakage, including bad plumbing (the water heater wasn’t installed properly), loose drain valve, poor maintenance, and excessive tank pressure. All of these can easily be fixed.
These were the easily recognizable symptoms of something being wrong with the water heater. Now let’s take a look at some of the most common water heater repairs in Haslet, TX that can prevent replacements:
Broken Dip Tubes
The dip tube is used to carry fresh water from the municipal supply through to the water heater tank as well as to the heat exchanger, which transfers energy from the combustion jets. The water begins to rise back to the tank from the heat exchanger as it warms up. In case the dip tube is broken it will supply cold water to the water heater tank where it will mix with the heated water. Many people believe that the water heater is not working just as well as it used to and start thinking of replacements rather than getting it fixed. But for a certified professional, the job is straightforward and can be fixed easily.
Failed Heating Elements
There are two heating elements inside an electric water heater’s tank; these heating elements increase the temperature of the water. If one of them burns out, there will be a decrease in the temperature of the water you get through your taps. And if both of them burn out, then you will just be getting normal tap water through your water heater also. Replacing the heating elements will lead to water heater repair in Haslet, TX.
A Faulty Burner
For water heaters powered with gas, dirt or rust accumulation in the burner and across the surface could lead to problems with ignition. There could also be a blockage or low pressure in the gas pipelines that could cause low heating power. Needless to say, you should never try to fix any gas leakage issues or water heater repair in Haslet, TX yourself and leave the job to the professionals.
Whether the problem is that the water is too cold or too hot, not enough hot or not enough water, too noisy or too rusty, a water heater repair in Haslet, TX job done by our team at Benjamin Franklin Plumbing Fort Worth will take care of these issues in no time, little effort, and reasonable money. We provide water heater repair services for all types of water heaters, whether they are electric or gas-operated. Our team of professionals can easily detect problems with your hot water supply and resolve the issue in a timely and efficient manner. We offer around the clock, high-class services to make sure you never have to run a cold shower ever again! Call us now for all your home service, installation, and repair needs!