Blog

Buying a heating, ventilation and air conditioning system is no small purchase so when you are looking to get one for your workplace in a building, advice from professionals in heating and air condition service in Fort Worth, TX is necessary. Don’t restrict the daunting task of selecting a heating, ventilation and air conditioning system to your knowledge because there is a lot more to it than heating or cooling your indoor space to a comfortable temperature nor is it just about adjusting humidity.

There are many different components of a heating, ventilation and air conditioning system that contribute to the comfort it brings to your indoor space. To name a few: the dry bulb temperature, air movement, humidity, cleanliness of air, fresh air and even noise levels. All of these factors can be considered as comfort requirements and you need to choose wisely because some heating, ventilation and air conditioning systems address these requirements better than others in Fort Worth, TX. If you are choosing a heating, ventilation and air conditioning system for a building in Fort Worth, TX, it is imperative that you make the right choice so you don’t have to revise it later on. While a building may have state of the art architecture, impressive interior designing, fast elevators and adequate lighting, if it is not comfortable for the occupants, none of the aforementioned characteristics seem attractive anymore.

There are plenty of factors that must be considered before you select a heating, ventilation and air conditioning system for the building in Fort Worth, TX. Let’s take a look at a few of them:

1.     The construction budget

This may be a no brainer but it must be emphasized nevertheless. In plenty of cases, the budget for installing and purchasing the heating, ventilation and air conditioning system provided to the design team by the owner or the contractor is imposingly inflexible. These budgets can also be calculated with the help of the design team. It is a challenging task to make do with the money provided by the contractor or the owner to the design team for a heating, ventilation and air conditioning system because the system needs to meet all the requirements of the building within a restricting budget. Most of the time, a heating, ventilation and air conditioning system design team cannot meet all the requirements with an insufficient budget and have to let go of one thing or another along the way.

2.     Shape or size of the building

One of the first things that professionals in heating and air condition service in Fort Worth, TX consider when selecting a heating, ventilation and air conditioning system for a building is the size of the building along with its shape. The size and shape of the building can significantly narrow down the types of heating, ventilation and air conditioning systems that are well suited for the particular building. For example: high rise buildings cannot be fitted with packaged direct expansion rooftop equipment since the air would have to travel long distances.

For an efficient and reliably operating heating, ventilation and air conditioning system, the distance between the components running the refrigeration loop should be as optimized, preventing it from being too long. If refrigeration equipment is located centrally in the building, the professionals of heating and air condition service in Fort Worth, TX will probably have chilled water systems installed. The selection of heating, ventilation and air conditioning systems can also be further narrowed down by the locations that the building owner wants the equipment to be placed in. For a space limited building, the heating, ventilation and air conditioning equipment can be placed on the roof or a remote location outside the building. If there is ample space within the building, the equipment can be placed in equipment room(s), penthouse or the basement.

3.     The building’s function

In order to select just the right heating, ventilation and air conditioning system for your building, the buildings comfort requirement must all be met which depends on the function of the building itself. Think of the humidity settings of a heating, ventilation and air conditioning system in a typical office and that of a supermarket filled with shoppers. Due to the difference in the humidity requirements of these two places, the heating, ventilation and air conditioning systems installed in these two places are going to be different in design as well. Similarly, the noise levels of a heating, ventilation and air conditioning system in a library and a supermarket are going to be different. Such factors are the reasons professionals of heating and air condition service in Fort Worth, TX must consider how the building will be used when selecting a heating, ventilation and air conditioning system for it. Always consider the comfort requirements of the building.

4.     Limitations in architecture

The heating, ventilation and air conditioning system selected for a building in Fort Worth, TX must not interfere with the coordinated way that different components of the building amalgamate. Therefore, blunders like having a cooling tower on the front low or way too many packaged DX units in every window should be avoided. To prevent the heating, ventilation and air conditioning system from hindering the architectural statement of the building, its equipment can be concealed. The distance between one floor to the next is usually kept as close as possible either to maximize the number of floors on a tall building or to reduce the construction costs. Either way, this leaves very little space in the ceiling plenum. Therefore, professionals of heating and air condition service in Fort Worth, TX will always advise you to go for chilled water terminal units or even water source heating pumps in such cases since the equipment will have to be located closer to each zone.

Choosing the right heating, ventilation and air conditioning system for your building will save you money in the long term. Make sure you always ask your local professionals in heating and air condition service in Fort Worth, TX for recommendations or better yet, their help.