Blog

No matter how well kept your home’s internal systems have been maintained, pretty much everyone is bound to experience plumbing problems at some point in time. It might be something as simple and trivial as a clog or as painstakingly troubling as straight out flooding. Plumbing in Fort Worth, TX is up to the mark for the most part but how the home owners address their plumbing issues varies greatly. It is important for residents of Fort Worth, TX to call in a plumber in Fort Worth, TX to address their plumbing issues properly without taking the matter into their own hands and making it worse. Plumbing is one domain of the house in which the home owners should never cut corners.

Do not hesitate calling a plumber in Fort Worth, TX to avoid these frequently occurring plumbing mistakes. Let’s take a look at some of the most common plumbing mistakes that take place in Fort Worth, TX

1.     Exposed pipes in winter

During winter season, your plumbing lines are most vulnerable to seasonal damage. Although the heating system in the house will ensure all the pipes indoors are well protected, the outdoor pipes are still susceptible to damage. Exposed outdoor pipes during wintertime can burst open and cause flooding. The warm climate of Fort Worth, TX does not mean that the outdoor pipes of your home are protected. You never know when the temperature is going to drop abruptly and as a result, your outdoor pipes might freeze without any prior warning. As the winter approaches, it is best that you call a plumber in Fort Worth, TX to wrap all the outdoor pipes for protection.

2.     Leaving the water on during plumbing repairs

Every time you call in a plumber in Fort Worth, TX for repairs, he expects you to turn the water off before he starts working. In fact, not turning the water off during plumbing repairs is one of the leading causes of indoor flooding. Whether it is you who is attempting a repair or a professional plumber, you must always turn the water off before starting. All you need to do is to switch off the main valve and you are good to go. Additionally, take a look at the local valves as well. Whether it’s the toilet, attic, or since that needs repairs, check the local valve connected to it before letting the plumber in Fort Worth, TX begin repairing.

3.     Misusing the drain

It is very easy to dump down all the grease from your cooking pans down the sink because you may be too lazy to clean it up but you ought to know that grease is what clogs your drain pipes, obstructing it completely after a particular amount of time. It might not be making much of a difference now, but with the passage of time, the grease being dumped down clings to the walls of the drain pipes and accumulates there. The hardened grease decreases the cross-sectional area of the drain pipe gradually until it is completely blocked. When that happens, you will call up your plumber in Fort Worth, TX to have him remove month’s worth of grease out of your drain. By being a little responsible and cleaning the grease along with other organic substances off our dishes thoroughly, we can avoid this entire ordeal altogether. It is ideal for water to be the only thing that goes down your sink’s drain pipe. These simple practices can help keep your plumbing in good shape and reduce the likelihood of plumbing problems in your house.

4.     Mismatching pipes

This is one of the main reasons that DIY plumbing is a very bad idea. In DIY plumbing, it is encouraged to go for the pipe of the right dimensions, shape, and size when you need to connect it to another pipe. However, they miss out on one important detail: the material of the pipe. It is imperative to use the same material when connecting two pipes together. Also, if you are connecting two pipes of different sizes together, the correct connecting piece must be used in order to ensure the connection is airtight as it should be. Just because the two pipes may hold well together does not mean that they are suitably fitted with one another. A lot of homeowners in Fort Worth, TX trying to connect pipes together in their plumbing system end up connecting a galvanized metal pipe with a copper pipe. This is one of the worst things you can do to your plumbing because these materials are extremely reactive to one another and will corrode quickly. A professional plumber in Fort Worth, TX will use brass or other appropriate fitting to connect the pipes of the aforementioned materials together.

5.     Recycling drain cleaners

Drain cleaners are heavy-duty chemicals that are underestimated by most home owners in Fort Worth, TX. Take a look the bottle warning yourself. Don’t forget that these products are used to clear out clogged drains which mean they contain toxic chemicals that are not to be fiddled with. They can be used periodically, but their overuse is what’s detrimental to your plumbing system. If you have reoccurring clogs in the same pipe, using drain cleaners repeatedly is not a good idea. Whether your pipes are made of MPVC or metal, the harsh drain cleaner will eventually eat away your pipe bit by bit. Persistent clogs are almost always caused by objects being stuck way down into the pipe where you can’t see them. In such a case, it is best to call a plumber in Fort Worth, TX for help.

6.     Not abiding by local laws

Your professional plumber in Fort Worth, TX is aware of all the local plumbing rules and regulations. He will ensure that the repairs he performs are complacent with the local law. This is why DIY plumbing projects can end up causing more harm than good. Later on, when you put your house on the market, these plumbing flaws will show up during inspection, which may result in the depreciation of your home’s value. Plumbing repairs often require licenses so leave it to the professionals.