If you have an expansion tank in your home, keeping it in good condition is important. An expansion tank helps to prevent water pressure from building up and causing damage to your plumbing system. If the expansion tank is not working properly, it can cause all sorts of problems for your home. In this article, we will outline three ways to keep your expansion tank in good condition and prevent any problems from occurring.
1. Proper Installation and Design of Expansion Tanks
This is the most important step in preventing problems with your expansion tank. Proper installation means the following:
A. Using the Right Size Expansion Tank
Installing the right-sized expansion tank is the best way to minimize potential problems. Expansion tanks are designed to relieve pressure build-up from heating, cooling, and shrinking water inside closed water systems. When you invest in the right size tank, it will have just the right amount of air space for both expanding and contracting as needed. You should consult a professional plumber in Benbrook, TX to get the correct size water tank for your home.
B. Installing Expansion Tanks in the Right Location
The location of your expansion tank is also important. Ideally, it should be located in an area free from debris and near other plumbing components, such as a water heater. It’s also important to ensure that the expansion tank is clear of any obstructions or objects that could cause damage. The tank should also be installed away from heat sources, vibration, or direct sunshine to avoid heat-based complications. That is why you need to hire a plumber for installations.
C. Installing a Temperature-Pressure Relief Valve on the Tank
A temperature-pressure relief valve is designed to regulate water pressure in the expansion tank. It works by regulating the temperature of the water inside the tank and releasing excess pressure when needed. This helps ensure that your system runs smoothly without any sudden bursts of pressure that can cause damage to other components. If you hire a plumber for the installation, they will usually handle this automatically.
2. Regular Inspection and Maintenance
Even the best-installed expansion tanks need regular inspections and maintenance. Failure to do so can result in problems such as leaks, corrosion, and clogging. A good inspection and maintenance routine entails the following:
A. Checking Tank Pressure
Checking the pressure in the expansion tank is important. This ensures that your system runs at optimum levels and prevents any damage from occurring due to low pressure. You can hire a plumber to check the pressure and top up if needed.
B. Cleaning the Expansion Tank
The expansion tank should also be cleaned regularly. This helps keep the system running smoothly and prevents corrosion or clogging from happening. Again, you should hire a plumber in Benbrook, TX for this job, as they have access to specialized equipment and know-how to help keep your expansion tank in top shape.
C. Checking Piping Connections
It’s also important to check the connections between the expansion tank and other plumbing components. This will ensure no leaks or corrosion occur due to loose connections or faulty piping. A plumber can check these connections and ensure they are secure and in good condition.
D. Cleaning the Valves and Connections
Finally, the valves and connections between the expansion tank and other components should be cleaned regularly. This will help ensure they don’t get clogged or corroded due to debris build-up. Your plumber can do this as part of their regular maintenance routine.
3. Replacing Critical Components Frequently
The expansion tank has several important components, such as valves, gaskets, and seals. These parts will wear over time due to regular pressure fluctuations and use. Replacing these components regularly can help prevent problems and keep your system running smoothly. Sometimes the whole unit may need to be replaced if the parts cannot be serviced or repaired. A professional plumber in Benbrook, TX can help assess and replace these components.
Replacing parts of an expansion tank as a way to keep it safe includes:
A. Investing in Quality Parts
Investing in quality parts for your expansion tank is one of the most important decisions you can make to ensure all resulting components operate optimally. When it comes to precision and accuracy, nothing can surpass a professionally supplied part that meets or exceeds exact manufacturer standards. While investing in quality parts may cost extra initially, it can save you much hassle in the long run.
B. Timely Replacement
While quality parts are important, they must also be replaced on time. Parts must be regularly checked to ensure they’re functioning as needed and replaced when necessary. When components wear out or start to break down, they can cause serious damage to the entire system. A professional plumber can help you with this, as they have experience in recognizing signs of wear and tear and when to replace parts.
Take Care of Your Expansion Tank from the Start
When it comes to protecting your expansion tank, prevention is key. Having a professional install and inspect your device can help identify any issues early on and prevent them from worsening. Regular maintenance should also be part of your routine to ensure all components function properly. Finally, replacing parts when needed will help keep the system running smoothly for years. By following these three steps, you can ensure your expansion tank is always up to par.
We Are the Plumbing Professionals to Trust with Your Expansion Tank
We have years of experience working with expansion tanks at Benjamin Franklin Plumbing of Fort Worth. Our team is highly trained and knowledgeable in the installation, maintenance, and repair. We use only the highest quality parts and materials to ensure our work meets or exceeds all industry standards. Contact us today to learn more about our services and how we can help you keep your expansion tank safe and in great condition. Call us now for a free estimate.