Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber


How to Deal With Low Water Pressure | Plumber in Fort Worth, TX

How to Deal With Low Water Pressure | Plumber in Fort Worth, TX

Pressure in the water pipes pushes water with force into pipes of our homes which is why we see a pressure on the outlets in our bathrooms, kitchens, etc. The higher the pressure, the better the flow from the outlets would be, and vice versa. Like in all other fluids and gases, pressure in water can also be measured in PSI (Pounds per Square Inch). When the pressure from the outlets, such as the shower, is low or simply not of the desired levels, we usually refer to the situation as weak water pressure.

Such situations are although easier to notice but quite difficult to detect. Therefore, we mostly need help from an expert Plumber in Fort Worth, TX in such situations. Plumbers are experienced professionals who have seen and dealt with many similar situations to that of yours and hence know how to quickly detect and solve the problem effectively.

According to Plumber in Fort Worth, TX, low water pressure has been frustrating for many homeowners recently and has been a source of exasperation for them. This is because weak or low water pressure makes carrying out daily chores and other tasks such as showering, dishwashing, laundry etc, more time consuming and difficult. For once or twice, it is bearable, but if it becomes a routine, you just cannot handle it and want to get rid of it.

Causes of weak water pressure

If you ever experienced weak or low water pressure at your home, you must be wondering what could be the reason behind it possibly be? There are several reasons why it happens. It could be due to your house’s location. If it is away from the reservoir, or how high or low your house is located in the town compared to the reservoir. On the other hand, it also depends on how high or low your area’s reservoir is placed.

This is physics, the higher the water is placed, the more pressure it has at the bottom. Similarly, if the height were not too much the pressure would be lower at the bottom. The difference between the heights of your house and the reservoir should be greater.

If your house were situated on a higher part of the locality, or on a hill, you would receive lower water pressures; on the other hand, if your house is situated on a lower part of the town, you will receive high water pressures. The same is the case with water reservoirs. If they are placed in a higher part of the locality, it will ensure the houses in the area receive a good water pressure.

Having said this, once you have moved to a house and have had the water meter installed. The water pressure should remain the same because the location of your house is not changing anymore. However, if you still notice that the pressure has reduced over time and it is not the same as it used to be, your house might need a Water line repair in Fort Worth, TX. Another obvious reason is that when you notice different pressures in the different parts of the house, this also means there are problems that need attention of a Plumber in Fort Worth, TX.

In the two situations mentioned above, these could be the reasons why your water pressure has become low over time.

Mineral deposit inside pipes

Water contains various contaminants as well as pollutants. These pollutants including dirt, sand, and debris may enter our house’s pipes if the main lines are cracked or leaking. These contaminants can start building up inside the piper of our house affecting the water flow. Even if the main lines are not cracked, water contains minerals, which also start building up inside the water pipes and hinder the water flow leading to the pressure become weaker.

Corrosion of Pipes

Water stays in contact with the metal pipes all the time. This might cause the pipes to start rusting on the inside. This rusting or corrosion build-ups on the inside affects the water flow and reduce the pressure of the water coming out of the outlets.

Plumbing Leaks

Another reason why your water pressure could be reducing is leakage. If you have any plumbing leaks, not all the water flows out of the outlets due to leaks resulting in a reduced pressure. You must hire a good plumber in Fort Worth, TX for your Water line repair in Fort Worth, TX.

How to solve

Before you can go ahead and solve the problem, first determine if the pressure is low at one outlet or all the outlets are facing the problem. If it is at one, you might just need to call a plumber in Fort Worth, TX and get that fixture or its aerator replaced. If this does not solve the issue, this means you have a major plumbing issue.

You will have to call a plumber in Fort Worth, TX anyway to solve the problem. However, this is what you can do before hand to find out where the problem is occurring.

  • Check to see if the low water pressure only occurs when you draw warm water, if yes it could be because of your water heater.
  • Make sure your shut off valve is not closed or half closed. Sometimes the valves loosen upon wearing out hindering the water pressure.
  • Flush your water heater. Water heaters also have minerals build up on the inside, which affects the water flow. This needs to be cleared up by flushing out the heater once in a while.
  • Take a look at your pipes, if your metal pipes look worn out, they may be corroded on the insides. You would need a plumberin Fort Worth, TX to replace the part of the pipes that is corroded.While you check your pipes also look for any possible traces of water leaks.

If you notice your water pressure has reduced, it is better to get an expert plumber in Fort Worth, TX to inspect and solve the problem.