Blog

If you are living in your house for the past one year or more, how much you understand and know the plumbing system of your house? Generally, homeowners know nothing more than running out tap water and showerheads. Neither do homeowners pay any attention nor feel any need to learn about their plumbing system. As per the plumbers in Arlington, TX every homeowner must know at least the basics of their in-house plumbing system. This is important to keep the plumbing system working at all times and to avoid accidental damages or emergencies.

So, if you don’t have any idea from where you will get all the water to your house and after its use, where all of it goes, then here we are to help you learn the basics of your residential plumbing system. There are plenty of components involved in a plumbing system so let us discuss the most common components in detail below.

Water Source

What is the water source from which you are getting the water in your house? Well, the primary water source is miles away from the house just like your local water treatment facility located in that area. Typically, the water used in our houses comes from the lakes and rivers. As per the plumbers in Arlington, TX the river or lake water is directed towards the close by water treatment plant by the use of pipes that are laid very deep under the rivers. These pipes are designed in a way that they don’t get damaged by fish.

Once water reaches the treatment plant, it is then disinfected and filtered through many processes unless it is deemed safe for the use. This process completes in a couple of hours. Throughout this process, the quality of water is checked at various spots. The processed water gets stored in a large reservoir and from there it runs through a large pipe network located under the ground until it is used by homeowners for their residential purposes.

Supply Pipes

The supply pipes are responsible to keep the hot and cold water separate, as suggested by the plumbers in Arlington, TX. Such pipes are generally referred to as risers and are linked to all plumbing fixtures available in a house. These hot and cold supply pipes are installed in pairs all across the house.

However, if your house is old then there is a good chance that these plumbing pipes are built of galvanized steel. In modern houses, generally, copper is used in terms of the plumbing system. The important point to note is that you should always replace your old plumbing system.

If you continue to use an old and damaged plumbing system or supply pipes you are more likely to incur frequent repair and maintenance cost by hiring the services of a plumber in Arlington, TX. If you replace the old plumbing system in a timely manner, this will prevent you from facing extensive water damage. So make sure your plumbing network is regularly inspected by a professional plumber in Arlington, TX.

Also if you are not aware of the diameter of plumbing pipes and you are facing slow water pressure issue, talk to your plumbing service and upgrade the network to modern pipes.

Hot Water Heater

Hot water is crucial in cold season. So how do you get hot water in your taps? Obviously, you own a water heater. But do you know where it is located and what heating process it involves? To get accurate details you need to talk to a plumber in Arlington, TX as they will provide you complete details. For now, let’s just skim over the major points.

Water running through shut off valve reaches to your plumbing network and enters in your house’s water tank that is usually filled with cold water at the bottom side. This tank gets heated by a burner and heating element. For this purpose, any material can be used including electricity gas and even oil. Once the water is heated as per the set temperature of the water heater, it rises up and gets out of the tank from the top. This water then flows to every area in your house through a plumbing system.

Sewage System

Have you ever wondered where does all the toilet waste go? Well, your house’s sewage system transfers the waste to the septic system where it gets separated. As per the plumbers in Arlington, TX sewage system is an integral plumbing network in a house but many homeowners fail to pay attention to in terms of annual repair and maintenance. This causes them to suffer from issues like sewage blocking. Once the waste is transferred to the septic system, the rest of the liquid sludge is then treated by the solid in more of a drain field. In this step, most of the contaminants are removed. Speaking of solid waste, this needs to be pumped out by taking the help of professionals.

In the bottom line

Your plumbing network is one of the most interlinked and integral networks that help you perform your everyday activities without any problem. That is why it is very important to keep this system well maintained. A plumbing issue is the most stressful situation regardless if you are facing it in your workplace or home. It makes the place unlivable and makes you incur heavy repair and replacement cost.

As per the plumbers in Arlington, TX not many homeowners are educated enough to take care of their plumbing network. In fact, most of them don’t even know their plumbing network or its associated components.

So stop taking your plumbing system for granted and get it inspected or repaired even for minor issues. It takes just a day or two for a minor plumbing issue to get aggravated and to affect almost all the areas of your house. So if you are in Arlington, TX, hire the expertise of Benjamin Franklin. Their team of plumbers is well versed in handling these plumbing issues. You can reach out to them easily by dialing the 24/7 helpline number available on their website.