Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber


All You Need to Know About Tankless Water Heaters |Plumbers in Lake Worth, TX

All You Need to Know About Tankless Water Heaters |Plumbers in Lake Worth, TX

If you are annoyed of waiting for hours for the hot water to come through your pipes then tankless water heaters in Lake Worth, TX is the best substitute for you.

This heater provides hot water instantly when it is needed. It also helps save money as it doesn’t produce standby energy losses that are related to storage water heaters.

Functioning of a Tankless Water Heater

Tankless water heaters in Lake Worth, TX are highly useful as they heat water specifically without the utilization of an extra storage tank. One tank is used for both the purposes, hot and cold water. A heating unit, either a gas burner or an electric component, is installed in close proximity to the hot water pipe.

When the hot water tap is turned on, normal temperature water travels through the hot water line into the heating unit. This unit heats the water on its way to the tap and provides a continuous delivery of hot water. Whereas, when a cold water tap is turned on, cold water runs through the line the way it is and reaches the tap.

Normally, tankless water radiators in Lake Worth, TX transfers 2 to 5 gallons of hot water in a minute which is approximately equal to 7.6 to 15.2 liters.

Types of a Tankless Water Heater

Tankless water heaters in Lake Worth, TX is available in two different types. Either they could be gas-fired or electrical ones. Gas-fired heaters are better than the electric ones as they have a higher stream rate than the electric ones and are able to heat water much faster.

However, sometimes even a gas heated tankless heater is not able to supply enough hot water simultaneously for different uses in large family units. Doing multiple tasks in the same house with a high level of demand for water might stretch the capacity of a tankless water heater in Lake Worth, TX to its boundary.

Applications for Tankless Water Heaters

A single tankless water heater can be utilized for various purposes but within its available limit that doesn’t affect its flow rate.

For this reason, multiple water heaters can be installed to break down the pressure on a single unit or separate tankless water heaters can be installed for different appliances as per your need. Tankless water heaters available in Lake Worth, TX can be used for different appliances which include:

  • Dishwashers
  • Clothes washer/ washing machines
  • Washrooms
  • Showers or hot tubs
  • Solar water heating system

Pros and Cons

Tankless water heaters in Lake worth, TX have an expected life of 20 years or more. Its parts are also easily available and can be replaced to extend the life of the unit. On the contrary, storage water heaters have a life span of approximately 10 to 15 years.

Also, unlike storage water heaters, where you need to wait for the tank to fill up with enough hot water that can be used, a tankless water heater provides a continuous supply of hot water whenever needed. However, their output capacity is limited to a certain amount of gallons that it can provide simultaneously for various purposes at one time in large households.

Tankless water heaters provide you the ease of usage and as well as help you save energy which can then be used for other purposes. As mentioned earlier, it helps avoid heat and energy losses that are usually associated with storage water heaters. On the other hand, although gas fired water heaters have a higher flow of water, they can waste both gas and energy if they are kept lit non-stop.

Selection of a Tankless Water Heater

When buying  tankless water heaters in Lake Worth, TX make sure to consider the following criteria in order to get the best unit that fits your needs.


Decide a suitable size for your place by determining the possible usage of hot water for all equipment per day and the maximum temperature required for them.

Energy factor

Estimate the energy factor by calculating the total amount of hot water produced per unit of fuel consumed in one day and the percentage of heat loss per hour. This helps determine how efficiently the water is heated from the available energy source.


Determine which energy source or fuel type you would use for the tankless heater as this would prove to be beneficial in selecting the most efficient unit for your needs.

Installation and Maintenance

Proper installation and maintenance of tankless water heater in Lake Worth, TX or anywhere else will increase its production efficiency. Installing a tankless heater can be a technical task that includes factors like proper knowledge of balance and safety issues, weather, size and fuel type, property policies etc. It is best to leave it in the hands of experts who have the right experience for installing such items.

The Final Word

Appropriate installment of a tankless water heater is technical and requires keeping in mind several factors. Therefore, it is recommended to get some professional assistance if you are planning to get one installed.

There are several home owners who have tankless water heaters in Lake Worth, TX who fail to  maintain their tankless water heater and face difficulty in the time of need. Either their unit fails to run or does not run efficiently. If you too live in Lake Worth, TX and are facing issues in your unit then contact Benjamin Franklin right away. Their team of professionals is well-versed in handling the complex issues and holds great experience in their field.

They are best known for their quality services and you can also take their assistance in the case of an emergency by calling their 24/7 emergency number.