Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber


Tips to Fix Kitchen Faucet and Sink Problems | Plumbers in Arlington, TX

Tips to Fix Kitchen Faucet and Sink Problems | Plumbers in Arlington, TX

Even though you are really careful about what goes down your kitchen sink, doesn’t mean that your kitchen sink never needs any kind of maintenance. With regular maintenance and proper use of a kitchen sink and faucet, you might delay these problems but there other so many challenges that you need to face. This includes odd noises, leaks, or consistency problems.

Mostly when a problem is faced by any household in their kitchen faucet, they believe that the piece is a default and that the manufacturer is the one who is to be blamed for this. Others think that maybe the life of the faucet has reached its end. While these two assumptions might be true in some cases, but what if the faucet has been installed only recently and its guarantee is not up yet? Would you still believe this?

It is therefore suggested by plumbers in Arlington, TX to first have a look at your plumbing in Arlington, TX yourself and then see if it can be fixed on your own with the basic tools and items that you already have in your toolbox or to call for the help of a professional plumber.

For your help, we have mentioned in this article a few tips and techniques that can help you troubleshoot different parts of the faucet and the sink of your kitchen.


The sprayer attached to your kitchen faucet is a useful piece and is used for a variety of cleaning purposes. With regular use, the nozzle of the sprayer can become clogged because of the mineral deposits that might have built up in a while. Before you open up the sprayer and detach its parts it is recommended by plumbers in Arlington, TX to once have a look under the sink. This is recommended because maybe the problem is not that major at all, and all that needs to be fixed is a kinked or twisted hose that is causing the blockage of water. If the hose doesn’t seem to get straight or is worn out then it definitely needs replacement.

In case the hose is the only problem, then you have the solution for it but if that doesn’t work then it is time to fix the head of the sprayer. The step-by-step process that plumbers in Arlington, TX suggest is to first turn off the faucet. Then with the help of a rubber band fix the handle to open position. Now take a cup of warm white vinegar and dip the head in it for 30 minutes. Take it out and run it at full blast to get rid of any debris and repeat if necessary.

For further cleaning remove the head of the sprayer and clean the nozzle from the inside with the help of a toothbrush or a straight needle pin. Reassemble in the proper sequence, and run it again at full blast to make sure the water is coming out with the right pressure.


If you have a problem in the kitchen faucet then you need to again follow a process as suggested by plumbers in Arlington, TX. This is necessary because while fixing the faucet there are many parts that you need to take care of so make sure you follow the steps in their correct order so that you are able to reassemble it again in the end.

First of all, you need to shut-off both the water-supply valves (one for hot one for cold) that are fitted under the sink. Now turn on the handle of the faucet so that all the water that is there in its pipes is drained off completely. Next, you need to remove the handle of the faucet. This can be removed by removing the screw that holds the handle in place. This screw is mostly exposed on the handle’s top but if the piece is a decorative one then you might need to look for it under any of its caps.

Once the screw has been removed, no unscrew the retainer pivot nut with the help of a pair of pliers. You would now see a spray diverter and spout sleeve. Lift them off and check the O-rings on the body. According to plumbers in Arlington, TX this is the area that is most damaged and needs replacement so if necessary do so. Also, there might be a need to replace the cartridge inside which can be pulled out with the help of a pair of pliers or as per manufacturer’s directions.

Finally, when the items have been replaced you need to reassemble the handle of the faucet and the faucet itself in the right manner so that it can function properly again.


If leaks are the problem that you are facing with your kitchen faucets then these need to be fixed immediately as a lot of water is wasted on a daily basis because of it. If you notice that the leak is from a drainpipe then it is because of the P-trap that plumbers in Arlington, TX explain more specifically as coupling nuts that hold it in place.

This leak can be fixed with the use of two pipe wrenches whose jaws should be covered with duct tape in order to avoid any scratches made on the pipe surfaces. Now you need to grip the lower part of the pipe with one tool and fix and tighten the nut with the other. With the handle removed, use an adjustable wrench to remove the packing nut. Pull up the stem assembly, unscrew the brass screw holding the washer in place, and replace the washer with a duplicate.

If the drainpipe stills keep leaking then plumbers in Arlington, TX suggests you call for the services of professional plumbers.

The Bottom Line

Every sink might face the issue one day or the other and availability of right tools is necessary as per plumbers in Arlington, TX at all times to fix this issue yourself. If you are not able to fix the issue on your own then it is better you ask for professional help.

If you too are someone who is looking for professional help in this matter the contact Benjamin Franklin right away. For further assistance call their 24/7 emergency number.