Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber


Handy Tricks and Tips to Handle the Clogged Drains Disaster

Handy Tricks and Tips to Handle the Clogged Drains Disaster

We all know the warning signs of drain clogging. The sink takes somewhat longer to drain. You start to see water pooling around your feet in the shower. Another evident sign is the foul smell. They’re all signs that you may soon be confronting a clogged drains disaster and choked pipes. Your pipes and drains are all set to get totally blocked. It is something you have to take care of as quick as you can, or you will have to face a busted pipe or a flooded, useless bathroom.

You then try removing the piled-up hair and all the gunk accumulated inside, but nothing works in your favor. You try to get the issue resolved through liquid cleaners, use plungers and whatnot, but nothing comes to your rescue – what then? Here are few hand-on tips to try for drain cleaning in Fort Worth, TX before you run to an emergency service.

Use a bent wire

This is a straightforward, yet an unconventional method. Take a standard wire coat holder and straighten it out as much as it can get. At that point, twist one end over to make a little snare. Push that past the drain cover and begin angling. You ought to have the capacity to get a wide range of hair and gunk stuff out of the drainage. Keep in mind, you generally need to be hauling the gunk out, not pushing it further. When you have removed as much of gunk as you can, pour boiling water, and it should clear things up effectively.

Using baking soda and vinegar

Blend 1/3rd of a measure of baking soda and 1/3rd of a measure of vinegar in a measuring glass. It will bubble up quickly. Pour the mixture in the clogged drain as quickly as you can. The effervescing reaction will remove the hair, gunk, and grime that have been stuck in the pipe. Let it rest for one hour or even overnight if you can. Flush it with hot water. There is another way of doing that. Instead of making the mixture, you can pour baking soda in the drain as much as you can and then pour in the vinegar over it.

Using soda pops

Colas and soda pops are not only famous for eating away your tooth enamel; they are corrosive for your drainage and works magic if you use them. Pour down two or three liters of cola or any carbonated drink in the clogged drain and make sure it is at room temperature as the gas molecules contract when temperature lowers. Let the effervescent properties of cola work on the gunk and debris. This trick works because of the phosphoric acid present in the colas, which has more acidity than lemon.

Using boiling water

This is the easiest tip of all and very understandable – hot water boils and dissolves almost everything in its way. Boil a bucket much water in a kettle, in parts if required. Now start pouring boiling water in the drains, whether they are of your kitchen’s sink or your washroom’s. Pour it in two or three parts, letting the hot water work between the pours. This will flush away the debris and grease along with it. And if it works, you can make yourself a tea afterwards, if there is some water left in the kettle.

Using caustic soda

Get some hand and eye protection. Caustic soda (otherwise called Sodium Hydroxide) can cause bad burns on any skin surface it touches. You can easily get the caustic soda from nearby hardware stores, but be careful with handling it. Pour 3/4 gallons of icy water into a clean bucket, and then add three cups of caustic soda. Mix it well with an old wooden spoon. It will start to bubble and heat up. Empty it into the clogged drain and leave for 20-30 minutes, then pour boiling water in the drain to flush it down. Repeat the process if necessary.

Flushing the pipes

This is the simplest one. To start with, put an empty bucket underneath the U-shaped pipe installed under the sink. The bucket will gather all the water that spills. Utilizing a plumbing wrench, remove the slip nuts at the two ends of the pipe. This would be easily done by hands. Then, when the U-shaped pipe is free, remove it and flip around it, taking out all the content into the basin. You may need to angle around inside it for trash, and do exactly likewise, with the pipes it was connected to. An old toothbrush is useful for getting the stubborn gunk out. Flush the U-shaped pipe with water and afterward, set up everything back together.

Using the drain snake

Drain snakes are easily available in the market at very low prices. Keep them at home, as they are handy in extracting out gunk and stuck hair from the drains. A flexible wire is bent from one end to catch all the stuck items.

Using the dish detergent

In case your toilet drains have clogged, pour 1/4 measure of dish cleanser in a bowl. But before that, heat some water to boil. The dish cleanser will go about as a grease cutter and help remove any oily deposit. Then, pour the heated dilute, and prepare to begin plunging. If the plunger does not cut it, rubber gloves might be the next choice.

Using pressure

If your shower drain is blocked, stir up a portion of baking soda/vinegar, as we said in tip 2. Pour it down the drain and after that, place the plug over it. Wait for an hour and then fill the bath with water. At that point, remove the plug. The weight of 40-60 gallons of water should to be sufficient to dislodge the blockage that has been extricated by the baking soda and vinegar. You can also try using the drain snake while pouring down the water.

And, if the problem still persists, you should call in the drain cleaning in Fort Worth, TX, and get Benjamin Franklin Plumbing in Fort Worth, TX to help. While they do that, note down their tips and techniques too.