Overflowing toilets is not something that any of us long for on any given day of the week, especially when you cannot resolve it yourself and you need professional plumbing in Arlington, TX to take care of it for you. If you are experiencing frequent clogs with your toilet, you can follow the instructions below to help in the prevention of an overflowing toilet from happening again. However, if you do need toilet repair, or from a clogged toilet, contact Benjamin Franklin for plumbing in Arlington, TX.
The first thing to remember is that by acting fast, it will essentially prevent the overflowing of the toilet. Second, whenever a toilet clogs do not flush it again; this will only make matters worse. Remove the toilet tank lid carefully from the top of the toilet tank and set it aside out of the way. With one hand, lift the float valve, and continue holding it, with one hand while you shut off the shut off valve for the toilets water supply line with the other hand. If the shut off valve fails to engage, you will need someone else to shut off the water supply at the main.
The main shut off valve should be located near your home’s foundation. If you are unsure of the location, then the water can also be shut off via the lever that is found in the water meter. Additionally, pushing the flapper valve in the bottom of the toilet tank should prevent water from entering into the bowl. However, sometimes this will not always work.
If you are the only person in your home and the shut off valve has failed, prop the float valve up with something and go and turn the water off yourself outside. You should become familiar with the float valve, flapper and shut-off valves for the toilet and the location of the main water shut off valve and water meter outside. If you are not familiar, learn how to turn off the shut off valves before a problem occurs. You should have a backup plan for propping up the float valve if you are caught with an overflowing toilet while you are home alone. Additionally, you can try to gently exercise the shut-off valve at the toilet to try and get it to shut off if you are having problems getting it to turn. Whenever a shut off valve has not been used in years, it can stick. You should also test the shut-off valve a few times a year to ensure it doesn’t lock up in emergency scenarios in the future. Contact Ben Franklin for plumbing in Arlington, TX for replacement shut-off valves if necessary.
Once you have accomplished to stem the overflow, then it is time to try and clear up the clog yourself. If the water is up to the rim of the toilet bowl, you will want to use some kind of container to scoop out some of the water and place it in another container before attempting to use the plunger. Additionally, make sure you are using a toilet plunger and not a sink plunger. If you are unsure of the difference, a toilet plunger has a flange to fit into the hole that is recessed at the bottom of the toilet. This flange ensures that there is a tight seal, which is a necessity for an effective plunging. If you do not have one, you will need to purchase one for each of your bathrooms.
Whenever a clog occurs that no matter how hard you try, you just cannot clear it up, make sure everyone in the household knows that there is a problem with that toilet, so they will not use it. Get in touch with Ben Franklin for plumbing in Arlington, TX to take care of the problem for you. Additionally, whenever toilets and drains are clogged at the same time, this may point towards a problem within the home’s sewer lines. Ben Franklin can handle all of your plumbing in Arlington, TX concerns, diagnose the problem and resolve it for you. We can even replace sewer lines without the need of destructive trenching in your home’s lawn.
The next time you have a toilet emergency and you are not able to resolve it yourself, give Benjamin Franklin Plumbing a call for all of your plumbing in Arlington, TX needs. We can take care of any plumbing related problems for you professionally and promptly. Give us a call today.
About Benjamin Franklin Plumbing in Arlington, Texas
Benjamin Franklin Plumbing in Arlington, TX has professional plumbing in Arlington, TX servicing Fort Worth and surrounding areas. Our experienced, courteous and friendly plumbers provide on time plumbing related services to not only Arlington but surrounding areas also. If you are in need of a professional plumber that you can count on for plumbing repairs, maintenance and / or installation then you can count on us at Benjamin Franklin Plumbing in Arlington, Texas.
Ben Franklin Plumbing is a leader in the field for plumbing related repairs. We are also one of the most trusted plumbing service brands in the industry with high standards of service that you can rely on. When you contact us you can rest assured knowing that you are receiving the best plumbing in Arlington, TX. Our commitment to service and excellence is reflected in our stone solid A+ rating with the Better Business Bureau. If you have a plumbing related problem in your home or business and you need help, do not hesitate to contact us today. Our professional, courteous and friendly plumbing in Arlington, TX will be more than happy to assist you and answer any of your questions and schedule an appointment with you to assess the plumbing related problem and resolve it at your earliest convenience. Give Benjamin Franklin Plumbing in Arlington, Texas a call today if you are looking for professional plumbing in Arlington, TX. If there’s any delay, it’s you we pay®