5 Most Common Plumbing Issues | Plumbing in Arlington, TX

Our modern houses have been designed, engineered, and constructed in a way that depicts that they are a creation of this age. Along with the interiors and exteriors of the house, the electric panels and plumbing networks are also designed with the help of best quality and latest technology that gives them a lifespan to last for a decade or even more. But this also depends on the type and model you have and other factors which include the source of water and its level of hardness.

The decision of replacing a faucet or changing the plumbing and pipes is sometimes taken because of the introduction of a new design or more advanced quality and technology but mostly these decisions are taken because of serious considerations that are known to cause plumbing issues.

Some of the most common repairing and fixture issues in plumbing in Arlington, TX are listed below in this article.

Drippy Faucets

This is one of the most common issues that are faced by almost every household once in their lifetime. Everyone also has some sort of personal experience at fixing this issue with the tools available with them. This issue of plumbing in Arlington, TX or any place else is not only a cause of irritation but also is one of the major cause of wastage of water and the increased water bills.

The most common reason why these faucets drip on a frequent basis is either because the internal washer has become stiff, is worn out, gone through tears, or has dislodged with the passing of time.

Slow Draining Sink

If water starts to drain slowly and as a result stays in the sink for a long while it means there is something that is blocking the drain and causing it to clog.

The kitchen pipes and plumbing in Arlington, TX are usually clogged because of the formation of fat, grease, and food remains inside the drain pipe. The bathroom plumbing in Arlington, TX is mostly blocked because of the knotted hair in the sink and bathroom tubs and soapy residue.

Since this issue is very common many households have tools ready to fix it on an immediate basis. Some people prefer to use a plunger to remove the clog, others like to prepare a mixture of vinegar and baking soda and pour it down the sink to dissolve the residue and clog.

The important point here to note regarding the plumbing in Arlington, TX is to solve the issue as soon as possible as delaying it would worsen the cause leaving the drain to be completely blocked eventually.

Clogged Toilet

One of the worst issues that you might face is a clogged toilet where the toilet bowl fills up and refuses to drain away. What cause this blockage in the pipes and plumbing in Arlington, TX that lead to the toilet are mostly because of paper and human waste.

It is therefore recommended to not flush away toilet papers in the flush even if they mention it to be biodegradable and flushable.

This issue is usually handled with the help of a plunger but if it is not able to solve the problem then drain auger or sewer snake are used for the same purpose.

Running Toilet

Another issue that leads to a huge amount of wastage of water is running toilet. The reason behind this issue of plumbing in Arlington, TX or anywhere else is a faulty flapper valve. This valve is responsible for the flowing the water into the bowl from the tank. This issue can simply be fixed with the help of a toilet repair kit that is easily available in any of the hardware stores.

Another less common cause of this issue is the formation of sediment in the tank that affects its filling and flushing. To check if this is the real causes behind it put some food color in the upper tank and see if it reaches the lower bowl without even flushing. If it does you have the issue right in front of you.

Low Water Pressure

A problem faced by many of the homes that are old and have been under use since ages are the water pressure that keeps on lowering with time. Rather than the water rushing and gushing out of the tap, it starts to trickle out which is a symptom that there is some issue that is being faced by your plumbing in Arlington, TX.

Most commonly it is the pipes that have started to leak because they have become worn, have broken from different places and spots, and have corroded over time. In some homes, the cause behind this issue is the mineral deposit and sediment that forms on the interior of the pipes and the shower head or aerator. To clean off this sediment you can dip the aerator or the shower head in vinegar for around 20 to 30 minutes and then run the water at full blast so that everything washes away.

The Bottom Line

These problems and their signs are sometimes clearly evident in the plumbing in Arlington, TX but homeowners are not aware of these signs and the amount of attention they need to give to these issues to stop any further damage. Therefore we recommend that you should not wait to upgrade your system until it is too late. Follow the most basic solutions we have provided to you in this article and live peacefully.

If you too live in Arlington, TX and see any of these signs, and don’t know what to do about it then call Benjamin Franklin right away. Their team of professionals is well-versed in handling the complex issues and holds great experience in their field.

They are best known for their quality services and you can also take their assistance in the case of an emergency by calling their 24/7 emergency number.