5 Tricks of the Trade Followed By Professional Plumbers | Plumbers in Fort Worth, TX
Just like any other kind of home improvement job, plumbing is not a DIY project. Plumbing is one of the most integral systems of your house. It helps you live in your house comfortably. It helps you continue your daily activities without any hindrance.
On the other hand, plumbing issues are the most commonly faced problems. This may include clogged drains, failure of your faucets or taps or even improper functioning of your water heater. Whenever we face any such scenario, the first thing that comes to mind is to take the help of professional plumbers in Fort Worth, TX.
A plumbing problem is already quite frustrating thus anyone who attempts to fix these issues as a DIY project, only aggravates the issue. There are many technicalities involved in a plumbing system and only a professional plumber in Fort Worth, TX understands how to handle them. They possess the right knowledge and tools to fix these issues.
For your better understanding, let us have a look at some of the tricks of the trade that professional plumbers in Fort Worth, TX use to fix a plumbing issue.
Loosen Tight Pipes by the Use of Heat
One of the common problems is when a threaded connection fails to budge. In this scenario, the professional plumbers in Fort Worth, TX perform the trick of using heat. This is particularly true when they are dealing with an old pipe connection. These pipes harden over time. So the easiest way to get rid of a tightenpipe is to heat it for a couple of minutes. The surrounding of the time is usually covered with a flame-resistant cloth.
As per the plumbers in Fort Worth, TX, the method is only recommended to be used for waste and water pipes and should never be attempted for fuel or even gas lines.
Piggyback Shutoff Valves
We all have shut off valves under toilets and sinks that have a record of rotten reliability. Oftentimes, these valves fail to close completely and sometimes, they don’t close at all. So in this case, especially when you just replaced your old valve with a new one, there is an alternative toreplacing, used by plumbers in Fort Worth, TX.
Several home centers have ‘piggyback’ shutoff valves which connect to other existing shutoffs. So plumbers simply disconnect the involved supply line and install a new valve. Installation of a new supply line is another good idea. In case the old shut off valve closes slightly, there is no need to shut off the main water valve. All plumbers prefer to do is to place a container under that valve to simply catch the trickle.
Fixing Clogs in a Matter of Seconds
Whenever we face a clogged drain the first thing that all of us do is to pour down a drain cleaner or a drain snake into the drain. Oftentimes we also disassemblethe trap. In addition to that,there are also some tricks used by the plumbers in Fort Worth, TX.
Plumbers also yank out the clog by using a flexible-shaft tool for pick-up or by using a Zip-it. Similarly, a dry/wet vacuum can also work to suck out the clog as the professional plumbers in Fort Worth, TX suggest.
Never Reuse Supply Lines
When some plumbers in Fort Worth, TX replace the faucet or a toilet, they easily help you save a few bucks by reusing the flexible old supply line. But thisis not a recommended by professional and well-reputed plumbers in Fort Worth, TX. This is because plastic material degrades gradually over time.
This means even a small leak may easily lead to severe water damage. While you might think of it as a small risk, it is certainly not worth taking. So professionals suggest buying new supply lines which are properly encased in strong braided stainless steel. They have fewer chances to burst.
In case your supply lines are way too old now, then make sure you replace them by hiring the services of professional plumbers in Fort Worth, TX.
The Use of Thread Tape
Dope and tape is an equallyreliable tool for sealing pipe threads. One of the biggest benefits of tape is that it doesn’t smear onto your tools or hands and or even end up on your carpet. The plumbers in Fort Worth, TX suggest the following tips to use the tape.
Don’t buy the cheap tape. They might work fine but thicker stuff is better. They are easy to handle and tears a lot more neatly. Usually pink is used for water and yellow is used for gas.
Use tape only for pipe threads and unlike dope, don’t use it on other connections and on compression
If you are wondering how many times you should wrap the tape around the pipe then professional plumbers in Fort Worth, TX says that there are no specific rules. But usually,the recommended answer is to wrap at least three times.
The most suggested way to wrap the tape around these threads is clockwise. If not, the tape will unwrap with the passage of time. It can also happen as you screw the joints together.
In the bottom line
A plumbing system is a complex and a sensitive network of pipes installed in our homes. While you may take it non-seriously, a plumbing problem can significantly increase your household expense. A faulty plumbing system cause you to incur heavy repair and replacement cost.
So if you are in Fort Worth, TX and need the assistance of a professional plumber in Fort Worth, TX then head over to Benjamin Franklin right away. Their team of professionals is well versed in handling complex plumbing issues. With that, it is also important to understand that attempting a plumbing issue without taking professional assistance is one of the biggest mistakes made by many homeowners.
Thus, make sure you take only professional assistance for your plumbing issues. You can take the services of Benjamin Franklin by dialing their 24/7 helpline number.