Hot water is a critical part of our daily activities. Water heaters add comfort and quality to our lives and homes. Hot water is needed for washing dishes, cooking, showering, and other endless mundane activities. However, if anything goes wrong with the supply of hot water in the home, those mundane activities can become weighed down.

Any leaks in the water heater can hurt this supply of water. This can also result in water wastage which means high water bills for the owners. Energy bills will also definitely rise since the water heater could be working in overtime to meet the supply. This unnecessary increase in energy will definitely be a nuisance in terms of costs.

Water leaks can also result in significant water damage. Stagnant water can affect the walls and floors of the home. If the structure of the house gets affected, it can mean significant costs in repairs and replacement. Damp walls and floors also invite termites and other contaminants. Mold and fungus can leave behind an unpleasant smell and cause immense health concerns.

If hot water begins to flood the floors, it can also result in scalding or burns. Such risks are unnecessary when they are easily avoidable by calling for water heater repair in Benbrook, TX to fix the issue.

If you feel as though your water heater has developed leaks, it is important to stay educated on the topic.

Determine the Source of the Leak

Narrow down the exact source for the leak so that you can actually attempt to fix the issue. If the leak doe not originates from the water heater, then it can actually be costly to tinker with the water heater needlessly. You do not want to cause more damage to such an expensive machine.

If you can’t locate the exact location where the water is leaking from, then you should clean the water from under the water heater. Then wait for a few before checking under the water heater again. If you don’t see another puddle of water then it may actually be nothing. If you actually find another puddle, later on, the water heater may be the source of the leaking water.

There are a few places on the water heater that are more susceptible to leaks. You can check all of the locations below for potential leaks:

  • Pressure and temperature reliefs in the water heater can also develop leaks. These relief valves are attached to some pipes that running down the floor. Any malfunctions in the leaks can also create pressure and temperature issues in the water heater. It is important to deal with such leaks at once by calling experts in water heater repair in Benbrook, TX. This is because it may result in more damage to the water heater.
  • The outlets and inlets of water connections can also develop leaks. These can be fixed quite easily since the main reason is usually loose pipe connections. Use a pipe wrench to solve the issue.
  • The insulation at the bottom of the water heater can also develop leaks which aren’t usually visible. Internal leaks cause the water to escape from underneath the whole appliance. It is usually caused by rust and corrosion that stems from deterioration from age. Such leaks require you to replace the water heater since old water heaters have more potential for high costs in repairs and maintenance. Experts in water heater repair in Benbrook, TX recommend that a new water heater would actually be more cost-effective.

If you can’t really detect the source of the leak, it is better to call for an expert in water heater repair in Benbrook, TX. This is a better course of action than neglecting the problem. Neglect can actually be more costly since the problem can grow worse over time, as well as cause a significant increase in energy and water bills.

Switch Off the Power

If you are sure the water leaking is heating, you should switch the water heater off before experts of water heater repair in Benbrook, TX arrive. You may need to switch off the main power supply of the water heater in order to turn it off.

Different water heaters need different techniques to close it. Electric water haters would need the main supply to be cut off from the circuit breaker box. Such safety precautions should be taken since electricity and water are a dangerous combination. So make sure you are safe before switching off the breaker to cut the power.

Gas water heaters have a switch to turn the appliance on and off. The main gas line for such heaters does not need to be touched. You can just tinker with the gas shut-off valve on the water heater.

Turn Off the Water Supply

Some water leaks can actually create structural damage if the water continues to flood the floor and wall. To prevent such damage, it is better to switch off the main water supply.

The main water supply valve for the water heater is usually above the water heater. It can be in the shape of a dial, gate valve, or a handle. However, if you can’t find this it is better to turn off the main water supply link in the basement.

However, it is important to stay safe in such situations since the water heater holds really hot water. It can lead to burns and scalding if you do the wrong thing. If you can’t do it safely, just call experts in water heater repair in Benbrook, TX as soon as possible. They can repair the water heater efficiently and effectively, as well as switch off the water safely.

Calling Benjamin Franklin Plumbing for water heater repair in Benbrook, TX is the best course of action. This is because they are really complex and expensive machines which can be harmed if you neglect their problems. Leaks can also result in high water and energy bills, which is an unneeded waste of money. So call the experts at Benjamin Franklin Plumbing for your water heater repair needs.