Photo By MicroStockHub at istock
Have you ever thought about how often you use the plumbing system in your Haslet, TX home? Most people don’t; however, if you start paying attention, you will see that your plumbing system is used many times a day, and you can’t live without it. You need running water to shower, brush your teeth, flush the toilet, cook, and clean. In addition, you rely on the drainage system to remove water and waste from your home.
Because you rely so much on your plumbing system, it must always function correctly. If you notice any of the following issues, it is best to call a plumbing service right away. The longer you allow plumbing problems to persist, further damage can occur.
#1 Drain Clogs
Drain clogs are among the most common calls a plumbing service receives from customers. As careful as you are with what you put down the drains in your home, there are some things you can’t prevent, and food, grease, hair, and soap scum will go down the drain, causing a clog.
A small drain clog can block the drainage pipe, causing the water to drain slowly. While this isn’t an emergency problem, it can be a frustrating one. Many household tasks require the water to run, such as showering, brushing your teeth, washing your hands, and doing the dishes. If the water isn’t draining quickly, the sink or tub will fill with water when you let it run, and it will take a while for the sink or tub to empty.
Many people try liquid drain cleaners to remove small clogs to save on the cost of hiring a plumber. Unfortunately, this isn’t the best way to solve the problem. Even if the drain cleaner helps the water drain faster, you can’t be sure the entire clog was removed. If not, it won’t be long before the water starts draining slowly again. In addition, these products contain harsh chemicals designed to break up clogs, which can damage the pipes.
Large clogs can block the drainage pipe completely, and the water won’t drain at all. In this case, a liquid drain cleaner won’t be effective because it will sit in the sink or tub, unable to reach the clog.
The best way to remove a clog is by hiring a plumbing service.
The plumbing service will send a tech to your home with a drain camera, allowing them to find the leak’s location and determine the size. This information will help the tech remove the entire clog, preventing drainage issues in the future. If you want to solve your drainage issue quickly and safely, you should call a plumber.
#2 Multiple Drain Clogs
If every drain in your home is slow or clogged, it is doubtful that there is a clog in every drain. The most common causes of drain clogs are clogs in the sewer line or the main drainage line. When clogs form in these lines, it can affect how the entire drainage system functions.
Liquid drain cleaners won’t help with these clogs, and you will need to hire a plumbing service. A plumber can safely remove the clogs from the line, allowing the water to flow freely down the drains.
#3 Noisy Drains
Do the drains in your Haslet, TX home make a gurgling sound when the water goes down? If so, you should call a plumbing service right away. The gurgling indicates a significant clog in the drain. Even though the water drains, it shouldn’t be ignored.
A substantial drain clog can prevent the water from going down the drainpipe, and the water will need to change directions to take an alternate route. The change in direction produces air in the pipes, causing a gurgling sound. If you don’t have a plumber remove the clog right away, it won’t be long before the water cannot find an alternate route, and the drain will clog completely.
#4 Toilet Clogs
Toilet clogs are relatively common. Flushing too much waste and toilet paper or something that isn’t meant to be flushed can create a clog, making it impossible to flush the toilet. If you do flush, the toilet will overflow, flooding the bathroom.
In many cases, plunging the toilet will break up the clog enough to be flushed. If the clog is too large, too solid, or located far down the drainpipe, the plunger won’t be effective, and you should call a plumbing service.
A clogged toilet is frustrating because you can’t use the toilet until the clog is removed. If you have only one bathroom in your home, you won’t be able to use the bathroom in your home; therefore, you should make the call immediately.
A plumber can remove the entire clog safely, so you can start using the toilet again.
Any pipe in your Haslet, TX home can leak, and leaks can occur in a number of ways. The most common cause is old, corroded pipes, and the temperature changes in the pipes can also create a leak. You use both cold and hot water throughout the day, and the frequent temperature changes can weaken the pipes, causing them to crack or leak.
Leaks are serious because the water can cause damage to your home’s structure and your belongings and wastes a significant amount of water, causing your water bills to increase; therefore, you should hire a plumbing service right away.
Leaks under the sink are easy to detect because you will see pooling water when you open the kitchen cabinet or bathroom vanity. However, it can be more challenging to detect.
In some cases, a leak behind the wall can cause water spots on the wall or ceiling. Leaks under the house make your basement floor warm, cause puddles in the yard, and damage your home’s foundation. Some leaks leave no visible early signs, and the only symptom is a higher than average water bill.
A plumbing service can use leak detection equipment to find the leaking pipe to be replaced.
#6 Water Heater Issues
Although your water heater is considered an appliance, it is essential for your plumbing system. Water doesn’t come into your home hot, and your water heater is responsible for heating the water and storing the hot water in the tank, so it is there when you need it.
If your water heater isn’t functioning correctly, it can interfere with your daily life. If the water heater in your Haslet, TX home is experiencing any of the following issues, it is best to call a plumbing service right away.
- No hot water: This could be due to an issue with the power source, the heating element, or the unit may have reached the end of its lifespan.
- The water isn’t hot enough: This can be due to an error with the thermostat setting, a faulty thermostat, or the heating element is failing.
- You run out of hot water frequently: This issue could be due to large amounts of settlement in the tank, providing less space for water storage. It could also occur if your water heater isn’t large enough to meet your family’s hot water demand.
- Discolored hot water: Sediment in the tank can contaminate the water, causing a brownish color. If the unit is over ten years old, the inside of the tank could be breaking down, contaminating the water.
- Foul-smelling hot water: A rotten egg smell signifies the presence of sulfate bacteria in the water tank.
- Strange sounds: Strange sounds indicate large pieces of sediment in the tank, banging against the sides.
- Moisture or water around the unit: Moisture around the unit indicates a disconnected or cracked hose, and water pooling suggests a leak in the water tank.
- Poor hot water pressure: Sediment in the water tank can clog the waterline, affecting the water pressure.
Water heater issues can affect the water temperature, contaminate the water and put your home at risk for a flood; therefore, it is best to call a plumbing service as soon as you notice the problem.
#7 Discolored Water
As mentioned above, discolored hot water is due to an issue with the water heater. If the hot and cold water has a brownish tint, the problem is with your plumbing system, and you should call a plumbing service immediately. It isn’t safe to use discolored because it is likely contaminated, and the problem should be resolved immediately.
#8 Dripping Faucet
Many people look at a dripping faucet as a minor nuisance, and after a day or two, they don’t even notice the dripping sound anymore. A dripping faucet is really more serious than you may think, and you should call a plumbing service to stop the dripping.
A few issues can cause the faucet in your Haslet, TX home to drip, such as a loose O ring, a worn gasket or washer, corrosion in the valve seat, or the faucet may be nearing the end of its lifespan. If you don’t call a plumbing service to fix the faucet, the dripping can escalate to a steady stream that cannot be stopped. In addition, a dripping faucet wastes a significant amount of water. This can be hard to believe since the water is only dripping; however, according to the Environmental Protection Agency, a dripping faucet can waste over 3,000 gallons of water per year, which will cause a significant amount of water and is harmful to the environment.
A plumbing service can inspect the faucet to determine why it is dripping, so they can repair the issue or replace the faucet if necessary.
#9 Running Toilet
The toilet in your Haslet, TX home is designed to run after it’s flushed, to refill the tank, and prepare the toilet for the next flush. If your toilet continues to run after the tank is full, you should call a plumbing service.
A few issues can cause your toilet to run constantly, including:
- The tank’s seal is failing.
- The flapper is disconnected or damaged.
- The float height needs to be adjusted.
- The refill tube needs to be shortened.
- The toilet is nearing the end of its lifespan.
If you thought that a dripping faucet wastes a lot of water, you will be shocked by the amount wasted by a constantly running toilet. A running toilet can waste up to 200 gallons of water per day, and 6,000 gallons a month, which can increase your water bill by over $70 a month.
The best way to prevent sky-high water bills is to hire a plumbing service immediately to fix the toilet.
#10 Frozen Pipes
Winter days in Haslet, TX, are relatively mild, which is why many homeowners don’t have their outdoor pipes wrapped in heat tape. Nighttime temperatures drop significantly, and with winter storms come freezing temperatures, causing your pipes to freeze, which would require an emergency call to a plumbing service.
When the pipes freeze, the water in the pipes also freezes and expands. When the water in the pipes freeze, the pipes can burst, causing a flood in your home and causing significant water damage and mold growth.
A plumbing service can thaw the pipes quickly and safely, preventing burst pipes. The plumber can also wrap the pipes in heated tape, which will prevent your pipes from freezing the next time the temperature drops.
Why Choose Benjamin Franklin of Fort Worth?
If you have an issue with your plumbing system and want to work with the best plumbing service around, call Benjamin Franklin Plumbing of Fort Worth. We are a full-service plumbing company, serving customers in the area for years.
Our plumbers are professionally trained, licensed, and insured, and they are qualified to fix any problem, whether simple or complex. If your plumbing issue is serious and you can’t wait, we provide emergency service 24 hours a day, 7 days a week. When you call for emergency service, we will do our best to get a plumber to your home as quickly as possible to resolve the problem.
We understand how valuable your time is, which is why we don’t expect you to wait around all day for one of our plumbers to arrive. If you have a scheduled appointment and the plumber is late, we will pay you $5 for every minute until they arrive.
To schedule an appointment, give us a call today or book online.