Blog

On demand water heaters, also known very popularly as tankless water heaters in Saginaw, TX, are much better than the traditional water heaters. Traditional water heaters use up a lot of energy by constantly heating up a large tank of water. Tankless water heaters work with a completely different principle altogether. They focus on quickly heating the water as it is supplied for use.

Making the upgrade to a tankless water heater in Saginaw, TX is like replacing your old beat-up car with a new model. The new model is a lot better at what it does and it is more energy efficient at the same time. There are a lot more bells and whistles inside it and the advanced sensors and electronics which make them much better than previous counterparts. This means there are more ways of being able to detect any possible issues with the vital appliance in your home. It also means that the problems with tankless water heaters have problems which are more sophisticated than the traditional water heaters.

With proper maintenance, a tankless water heater in Saginaw, TX can last you for at least a good two decades. The problem is that things like corrosion, mineral buildup due to hard water, excessive demand of hot water and improper installation can lead to problems early on. Here are some of the most common problems with tankless water heaters and how you can resolve them.

1.   Mineral Buildup

One of the biggest problems which tankless water heaters in Saginaw, TX can have is mineral buildup due to the hard water we have in the region. Maintenance of a tankless water heater can be quite expensive due to the buildup of calcium and other minerals. This is one of the most common issues which can significantly decrease the lifespan of a tankless water heater in Saginaw, TX. It initially stops it from working as efficiently as it can and that eventually leads to premature wear and tear. The kind of breakdown from hard water mineral buildup is not something that the warranty will cover.

If you are facing the problem of hard water supply in your home, it would be a smart decision to invest in a water softener. It will reduce the amount of minerals passing through the tankless water heater. Alternatively, you could even install a scale filter which will also do the same job. If you are not willing to invest in these, there is another option. You will have to regularly flush the tankless water heater with a vinegar solution. The vinegar solution, followed up with the water will make sure that the mineral deposits within the heater are loosened up. After that, it is just a matter of letting more water pass through it and allowing the tankless water heater to clean itself up.

2.   Corrosion

While tankless water heaters in Saginaw, TX are less susceptible to corrosion than traditional ones, it can still happen. There is always the chance for some condensation to leak into the gas burner which can cause corrosion. If that happens, the gas supply becomes interrupted. It’s not very likely to happen but it can even cause the internal computer to shut down.

This is caused by a poorly installed tankless water heater. Make sure that when you’re getting it installed, the job is done perfectly. It is an important investment for your home and you cannot afford to have such a simple mistake ruin your investment.

3.   Excessive Demand

When there are multiple hot showers running at the same time, it can cause the tankless water heater in Saginaw, TX to overload. There is too much stress on the water heater to meet the demands of hot water. The computer might simply just cause the water heater to shut down if it cannot get enough gas to be able to bring the water up to the right temperature.

This is a common problem but a very simple one. Your tankless water heater will be safe even when it starts to get overloaded because of the computer. It shuts the appliance down before it takes any damage but it can be very annoying for the person in the shower. The solution is actually quite simple. Just make sure that there are not too many simultaneous hot water applications going on in the house at the same time. If you want to turn on the dishwasher but someone is in the shower, just practice patience. It’s as simple as that, to be honest.

4.   Combustion Shut Down

One of the most crucial things for tankless water heaters in Saginaw, TX is that they need to vent properly. The unit generates a lot of heat in order to bring the water up to the right temperature so that it can meet your demand. This means the excess heat it generates has to be let out properly. If it heats up too much, the internal computer within the tankless water heater can cause it to shut down.

The solution to this problem is not as difficult as you might think. You just have to make sure that during installation, the venting is done properly. If the venting tubes are too long or if they are too jumbled up, it can cause the water heater’s computer to automatically shut it down.

If You Cannot Identify The Problem

It often happens that there is some sort of problem with the tankless water heater in your home but you cannot figure out what it is. First things first in this scenario, make sure that you have sorted all of the things we have mentioned above out. If the problem still persists and you cannot place a finger on what the source of the problem is, it is time to call in the experts.

At Benjamin Franklin Plumbing Fort Worth, you get some of the best technicians in the field. All you have to do is call us and we will come in to handle the situation. Whatever problem your tankless water heater in Saginaw, TX is having, we shall resolve it. That is a guarantee. for more information, check out our website at benjaminfranklinplumbingfortworth.com.