Plumbing Issues That Require A Call To A Plumbing Company | Burleson, TX
People have relied heavily on their plumbing systems since indoor plumbing was invented. You rely on your plumbing system to provide running water and to allow the water to drain. The plumbing fixtures, such as the sink, tub, and toilet, are also essential.
It isn’t uncommon to panic when a plumbing issue arises because life in your home will quickly become inconvenient. A DIY repair isn’t recommended if something goes wrong with your plumbing system. Without the necessary training and experience, you could do more harm than good if you try to handle the problem yourself.
If your plumbing system experiences any of the following problems, it’s best to call a plumbing company in Burleson, TX.
#1 Plumbing Leaks
Plumbing leaks are relatively common and are one of the most common calls plumbers receive. Leaks occur when the pipes rust and corrode, a joint is loose or disconnected, or when the seal fails.
Plumbing leaks are serious, and the leaking water will cause significant water damage and mold growth. Also, you’ll waste a considerable amount of water, causing your water bills to increase, so it’s best to call a plumbing company in Burleson, TX when you discover the leak.
Leaks under the sink or behind a wall are easy to detect because you’ll see standing water or water spots on the wall. However, leaks under the house can be more challenging to detect, and there are a few signs to look for, including:
- The basement floor will feel warm. If you don’t have a basement, the floors on the first floor of your home will feel warm.
- Puddles can form in the yard even though it hasn’t rained. You may also notice parts of the lawn are lusher than the rest.
- Wet or damp floors
- Foul odors
- Cracks in the walls
- Cracks in your home’s foundation.
- Foul odors
A plumbing company will send a tech to fix the leak. If they can’t find the leaking pipe, the plumber will use leak detection equipment to find the leak so that it can be repaired as quickly as possible to prevent further water damage and mold growth.
#2 Slow Drains
A small drain clog will cause the water to drain slowly, which is very inconvenient. You have to worry about an overflow whenever you do anything that requires the water to run, such as showering, brushing your teeth, or doing the dishes.
Many people will try to remove the clog with a liquid drain cleaner, but it’s best to call a plumbing company in Burleson, TX. Liquid drain cleaners contain harsh chemicals that can damage the pipes and cause a leak over time. Also, you can’t be sure the drain cleaner removed the entire clog, and the clog will get bigger if any part remains.
A plumbing company will send a tech to your home to remove the entire clog, allowing the water to flow down the drain quickly.
#3 Complete Drain Clog
A significant drain clog will prevent the water from draining, resulting in standing water in the sink or tub. A complete drain clog will prevent you from using the sink or tub until the clog is removed, which can be very inconvenient. Also, the standing water will cause bacteria growth, putting our family’s health at risk. A liquid drain cleaner won’t have an effect because it will mix with the standing water, and it’s best to call a plumbing company.
A licensed plumber can use a drain snake, air-jetting, or hydro-jetting to remove the entire clog, allowing the water to flow freely down the drain, and you can start using the sink or tub again.
#4 Toilet Clog
Toilet clogs aren’t usually a significant cause for concern. Clogs often occur when too much toilet paper and waste are flushed and can generally be removed with a plunger. If the plumber isn’t working, the clog is too large, too solid, or located too far down the drain pipe for the plumber to be effective, you’ll need to call a plumbing company. It’s best to make the call right away because you can’t flush the toilet until the clog is removed because it will overflow all over the bathroom floor. If you only have one bathroom, the clog is much worse because you can’t use the bathroom in your own house.
A plumber will use a drain auger to break up the clog enough to be flushed. If the clog is located too far down the drainpipe, the plumber can remove the toilet to reach the clog safely.
#5 Running Toilet
Toilets are designed to run when flushed, allowing the toilet tank to fill and prepare for the next flush. If your toilet continues running when the tank is full, it’s best to call a plumbing company immediately.
A running toilet could waste up to 900 gallons of water a month if left ignored, resulting in a considerably higher water bill than usual. This amount of wasted water is harmful to the environment.
A few issues can cause the toilet to run constantly, including:
- The toilet is old and should be replaced.
- The float height is too high or too low.
- The refill hose is too long.
- The flapper or flapper chain is damaged.
A plumber can determine which issue is causing the toilet to run and make the necessary repair quickly to prevent you from wasting water.
Call Benjamin Franklin Plumbing of Fort Worth Today
If you have a plumbing issue and need to call a plumbing company, look no further than Benjamin Franklin Plumbing of Fort Worth.
We’re a full-service plumbing service, and our plumbers are professionally trained, skilled, and can handle the toughest jobs in the plumbing industry.
We know that plumbing issues can arise at the most inconvenient times, so we provide emergency plumbing service 24 hours a day, seven days a week. If you have a problem that can’t wait until we have an available appointment, we’ll get a plumber to your home as quickly as possible to repair the issue.
To schedule an appointment for plumbing service or repair, call Benjamin Franklin Plumbing of Fort Worth today.
