Blog

Nowadays, people try different methods to make their homes energy-efficient. Because of this, they are always on the lookout for options that can help them conserve energy. Due to this, not only are they saving money, but also positively contributing towards the environment.

This is why a lot of homeowners are opting for tankless water heaters in Haslet, TX as they are more energy-efficient than the regular storage water tankers. These heaters do not hold a reserve of hot water in a storage tank.

Tankless water heaters in Haslet, TX, are growing in popularity day by day. However, most consumers are still concerned that these are not feasible for their house. They get a little confused as to what aspects of tankless water heaters should be considered for making a successful purchase in Haslet, TX.

If you are also someone who lives in Haslet, TX area and are deciding to get a tankless water heater installed, then here are a few points you need to keep in mind.

Selecting the Fuel Type

This is a critical decision as the type of fuel you select for your tankless water heaters in Haslet, TX, determines the size and energy efficiency of the unit. These heaters run on three types of fuel – natural gas, propane, or electricity. Gas tankless water heaters are generally more expensive and require professional servicing every year. However, they tend to perform better in terms of energy savings standpoint. They are an excellent option if you have natural gas and/or propane available.

Two necessary requirements for an on-demand system to run effectively are quick response times and high heat output. Other considerations for selecting a fuel type for tankless water heaters in Haslet, TX, include the determination of fuel supply line. The line must be big enough size to provide enough fuel for large burners, if you want to get an immediate supply of hot water.

An ignition system also needs to be considered, as the more complex the system the more it saves energy and vice versa. For indoor gas tankless water heaters, venting system is required to direct the exhaust outside. The vent needs to be made of stainless steel as it is corrosion-resistant. This is necessary because if not, the efficiency in combustion would cause condensation to develop inside the vent which essentially means a breakdown.

Selecting the Energy Savings

Since energy savings is one of the main reasons why people are switching to tankless water heaters in Haslet, TX, hence, it is a factor that needs to be given attention. In order to choose the right unit, the water requirements of a household need to be determined well before hand. Energy factor can be used to determine a unit’s efficiency by determining the useful energy that is coming from the water heater divided by the energy that went into it. Greater the final figure, more efficient the water heater.

One exception that needs to be kept in mind at this point is that since gas is a less expensive source of energy it might be possible that it would deliver a lower operating cost when compared to electricity.

For electric tankless water heaters in Haslet, TX voltage, amperage and availability of circuit breakers should be considered. Understand the needs of your home to know if an upgrade is required. Have a circuit breaker examine your house to determine if it has all the connections you need and then choose a unit accordingly.

Selecting the Right Warranty

Warranties of every model and every manufacturer would vary. Therefore, it is your concern to select the appropriate unit as per your needs. Many manufacturers only provide a warranty of their units only if the buyer registers the unit and also gets it installed by their own company professionals. This is the reason why comparing warranties of tankless water heaters in Haslet, TX is important. When the manufacturer backs their product with a reasonable time frame warranty then this means that they have faith in the reliability of their product and know that it is of excellent quality.

Selecting the Proper Size

Proper size of a tankless water heater can be determined by the temperature rise that is needed to achieve a specific flow rate. Usually, a water heater delivers 2 to 5 gallons of hot water per minute. Once these 2 factors, temperature and flow rate, are calculated it becomes easy to select the right unit for your place.

For selecting a size for the tankless water heater, first determine the household’s peak demand flow rate (gallons per minute – GPM) and then determine your home’s temperature rise. Then calculate your flow rate by determining the number of hot water devices used at one time and add GPM of each device to it. Now subtract the temperature of water entering the home from the desired hot water temperature.

Following these guidelines would definitely make it easy for you to select the best unit that is appropriate for your household needs.

The Bottom Line

Selecting a tankless water heater in Haslet, TX is a serious task and requires careful consideration and detailed checking of all its aspects.  There are several homeowners who are unable to select the right unit as per their household’s needs and face difficulty in reaching for a final decision.

Therefore, it is recommended to get some professional advice if you are planning to buy and install one at your place. If you live in Haslet, TX then call Benjamin Franklin right away. Their team of professionals will guide you in selecting the right unit. For further assistance or in case of emergency call their 24/7 emergency number.