Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber

Blog

Water Heaters: A Guide | Tankless Water Heaters in Fort Worth

Water Heaters: A Guide | Tankless Water Heaters in Fort Worth

Buying a water heater for yourself? You’re at the right place then! With so many options available in the market, it can be difficult to select the best type and model, keeping in mind your budget. But don’t worry, we’ll walk you through the entire process, and make it really easy for you to select either tank based or tankless water heater in Fort Worth, TX.

How would you fuel your water heater?

The first decision that you have to take when selecting a water heater, is to decide the fuel type. Both tank based and tankless water heaters can operate using any of the source. But some of these sources are more expensive, whereas some may not be available in your area.

Electric

Electric water heaters use either a single or two heating elements to increase water temperature. They are affordable and offer high efficiency. Standard electric water heater units range from around 28 gallons to 100 gallons.

Gas

Gas water heaters operate using a burner. Whether you go with storage water heaters or tankless water heaters in Fort Worth, TX, you’ll have to install gas operated models in place where air circulation is good, away from combustible materials. The efficiency of these models is better than electric water heaters, but they are also more expensive.

Hybrid

These models utilize energy in the air to heat water. Both indoor and outdoor air can be used. The models feature built-in tanks, but additional tanks can easily be integrated with an existing unit. Upfront costs are high, but since these heaters are energy efficient, you’ll drop your bills.

Which types of water heaters are available in Fort Worth, TX?

Water heaters in Fort Worth, TX can broadly be divided into two models: storage or tank-based water heaters and tankless water heaters.

Storage Tank Water Heaters

Storage tank water heaters are quite common, featuring an insulated tank which stored heated water until it is utilized. These models can run using electricity, natural gas or liquid propane. The last two of these are more energy efficient, and hence, are associated with lower operational costs.

Before buying tank-based water heaters, be sure to check out the specified energy efficiency as well as the annual operating costs. You’ll have this information on the Energy Guide label on the unit.

Tankless or On-Demand Water Heaters

Tankless water heaters in Fort Worth, TX don’t store any water. Instead, they heat water whenever required, basically when a tap is turned on. Compared to storage water heaters, they are more efficient and available as electric, gas or LP models.

Sometimes, the flow rate of tankless water heaters in Fort Worth, TX can be limited, but as long as you choose a model of the required capacity after considering your daily usage, you wouldn’t have to face any issues. Good models can heat around 3.5 gallons per minute, which is good enough for the average household.

Utility or point-of-use water heaters

Water heaters that come with a small storage tank are often referred to as utility or point-of-use water heaters. They are a good choice if hot water is required at a shop, garage or outbuilding. Standard units are available in sizes starting from 2.5 gallons to 90 gallons.

What makes tankless water heaters in Fort Worth, TX preferable?

For starters, they offer high energy efficiency.  Tankless water heaters in Fort Worth, TX, can easily be installed at any convenient location either inside or outside your home. If required, these models can heat your home’s water a single point of use, or you can have separate tankless water heaters for your bathroom, kitchen and other areas of your house depending on the usage.

Tankless water heaters provide a constant hot water stream without increasing energy costs. They might involve some upfront costs, but these are compensated in the long run. Tankless water heaters in Fort Worth, TX are indeed, a worthy investment.

Functioning

  • When you turn on the tap, a tankless unit initiates its operations and begins to heat water.
  • The temperature of the water running through the pipes is monitored. Accordingly, the burner decides the amount of heat it must produce to heat the water to a desirable temperature, which then flows out through the tap.
  • Once you turn off the faucet, the unit also shuts down and does not use any energy until the tap is turned on again.

The above process is accomplished within seconds and you get water almost instantly when you turn on the tap.

Benefits

Instant availability

Tankless water heaters in Fort Worth, TX, provide instant hot water without increasing your energy bills or space requirements.

Energy Savings

You can save around 40% energy if you use tankless water heaters in Fort Worth, TX.

Longevity

Tankless water heaters are durable and can last around 20 years or so.

Space Savings

Tankless water heaters in Fort Worth, TX are installed in an area of just 16 square feet, so their space requirements are much lower compared to alternatives. They can be installed on any inside wall or even outside your home.

How much capacity or flow rate is required?

A tank-based water heater is classified by capacity i.e. the water it can hold at any given instance, whereas a tankless water heater is specified by its flow rate.  If there are around 2 members in your family, the tank should be able to hold 30 gallons of water. And if you have 4 people in the house, then the appropriate tank size is 50 gallons.

Considering tankless water heaters in Fort Worth, TX, the flow rate should be around 2.5 gpm or 3 gpm if you are using a shower. For the washing machine, a flow rate of around 2 gm is enough, and for your kitchen needs, you would need something around 1.5 gpm.

So, are you interested in tank based or tankless water heaters in Fort Worth, TX? Reach out to us and well help you decide!