Emergency Plumber Arlington TX
Fort Worth Area Plumber
Arlington Area Plumber

Blog

Which Type of Pipe Is the Best and How a Plumber in Fort Worth Helps

Which Type of Pipe Is the Best and How a Plumber in Fort Worth Helps

Photo By Madcat_Madlove at Shutterstock

There are several types of pipes available in the market. However, deciding which pipe to use while fixing a leak can be the difference between frequent backlogs and plumbing issues. Consulting a plumber in Fort Worth about which pipe you should use can help you pick the right pipe for repair.

However, if you don’t consult an expert plumber in Fort Worth and buy the wrong pipe according, you will suffer from recurring problems. Your choice of pipes can be different depending on whether you are installing plumbing pipes in a residential home or commercial buildings.

A plumber in Fort Worth will use copper, PEX, or PVC for all those different situations. Usually, brass and galvanized piping are the best for other types of plumbing.

In this article, we discuss various types of plumbing pipes and where they are used. We will also explain how a plumber in Fort Worth helps in choosing the most suitable one. Each type has its unique pros and cons, so homeowners in Fort Worth should consider reading about all of them.

Copper Plumbing Pipes

Traditionally, most people use copper pipes for plumbing. The reason for their popularity is that they are incredibly durable and reliable. These pipes are resistant to corrosion and are great for both hot and cold-water use.

Furthermore, copper pipes are less prone to leaking compared to other types of pipes. They fit tightly and don’t allow pollutants to enter the water running through it. These pipes are also heat tolerant, have a longer lifespan, and you can use them after recycling.

However, on the downside, these pipes are also more expensive than other pipes. Besides that, copper pipes are difficult to fit. You need to solder them together with additional fittings. Therefore, you will need an experienced plumber in Fort Worth to do the job for you. Homeowners need to be wary of copper pipes in old homes because they can contain lead-based solder.

Galvanized Steel Plumbing Pipes

Galvanized steel pipes are extremely strong but are still not used as frequently as they should be. A plumber in Fort Worth will need to thread and screw each end of the pipe into one another pipes with connecting joints.

Perhaps the reason that these pipes are not popular is that they are relatively heavy, which makes them hard to work with for a plumber in Fort Worth. Besides that, these pipes are also more prone to internal rusting.

This happens because of caused by the zinc coating in the pipe. This small problem can have a trickledown effect as it also causes lines to clog over time and reduce water pressure. Furthermore, it can cause the water to become discolored, and in rare cases, release lead into the tap water.

Cast Iron Plumbing Pipes

Cast iron piping is usually found in old homes. Although these pipes have an aged appearance, you can use it for long periods of times until the rust gets through completely. Nowadays, these pipes are preferred in sewer lines because of their durability.

A plumber in Fort Worth will join cast-iron pipes through either a thread or a bell-and-spigot. Comparatively, pipes with threaded joints are more expensive. The smallest size in cast iron pipes is 4 inches. Since these pipes are extremely heavy, your plumber in Fort Worth will have to support them during assembly.

Polyvinyl Chloride (PVC) Plastic Plumbing Pipes

PVC pipes are one of the lightest pipes to work with for a plumber in Fort Worth. Usually, people use them for transferring hot and cold potable water and disposing of sewage. PVC pipes can vary from each other depending on the configuration and thickness.

Interestingly, they also differ according to where you are using them. For instance, PVC pipes designed for sewer pipes are not ideal for use as pressure water pipes. PVC pipes designed for potable water use are labeled as either “NSF-61” or “NSF-PW.” These labels are meant to show that the PVC pipes comply with health requirements mentioned in the NSF/ANSI Standard 6.

One of the clear benefits of using PVC pipes is that they don’t corrode, rust or degrade over time. This makes these pipes excellent for bathtub drain lines, toilets, vent stacks, and sinks. It can also resist high water pressure. However, these pipes cannot stand hot water and will reshape under extreme heat.

Cross-Linked Polyethylene Plumbing Pipes

This kind of piping is generally referred to as PEX piping. Its plumbing pipes are widely used for water supply lines. Among all the plumbing pipes, crossed-linked polythene pipes are the easiest to work with.

They are not only color-coded but are also light, easy to cut and easier to join. Furthermore, they install quickly, need minimal maintenance, and are great at limiting leaks. It also easier passes through walls, and a single piece can cover an entire house.

Since cross-linked polyethylene plumbing pipes resist heat, you can use it for both hot and cold water. However, we would recommend not using these pipes outside because UV rays from the sun can damage them. Moreover, PEX pipes are relatively costlier but offset this by minimizing the need for maintenance.

Benjamin Franklin Plumbing is a service that will provide you with the best plumber in Fort Worth. The company has dedicated a number of years in serving durable plumbing solutions to the people of Fort Worth. Their focus is to deliver immediate and long-lasting solutions to all customers. The company hires professionals who have necessary licenses, so you can rely upon the plumber in Fort Worth they send over.

If you have any plumbing issues or need to install pipes in Fort Worth, call us at 817-983-7876. For further information about our services, visit the website.